Heating

More comfort, longer swimming season – for above-ground pools up to 16,000 liters

Enjoy pleasantly warm pool water for longer with the W’eau Mini Power 20 4 kW heat pump. This compact and sleekly designed model is specially designed for above-ground pools and extends your swimming season from May through August. Thanks to its quiet operation and Plug & Play installation, it is ideal for any outdoor enthusiast looking for comfort and ease of use.

✔ Powerful & compact

With a power of 4 kW, this heat pump is suitable for above-ground pools up to 16,000 liters. It operates at a fixed power (on/off), making it easy to use and affordably priced. Thanks to its low minimum flow rate of 2 m³/hour, it is perfect to combine with smaller pool pumps.

✔ Plug & Play installation

Connect the heat pump quickly and easily with the included 32/38 mm couplings. Plug the plug into the socket, and it starts heating immediately. Compatible with most above-ground pools from brands such as Intex, Bestway, and EXIT. For even better control over the water flow, we recommend using a bypass kit.

✔ Smart and automatic

Thanks to the built-in flow switch, the pump switches on automatically as soon as the pool pump is running. So you don't have to adjust anything manually – ideal for hassle-free use.

✔ Energy-efficient performance

The Mini Power 4 kW delivers excellent efficiency:

• At an ambient temperature of 15°C: COP 4.20

• At an ambient temperature of 26°C: COP 5.20

✔ Installation & space

When placing, ensure at least 80 cm of free space around the pump and 250 cm on the air discharge side. For the best performance, place it as late as possible in the water circulation, but before any salt water system.

What else do you need?

An additional 32 or 38 mm hose and hose clamps for connection to your filter pump. The required hose barbs are included as standard.

SuperFish Pond Heater – reliable protection for your pond in winter

The SuperFish Pond Heater 150W is an energy-efficient pond heater that prevents your pond from freezing over completely. By maintaining an open hole, the gas exchange remains at an adequate level, which is essential for the well-being of your fish during cold periods.

Prevents ice formation and suffocation of fish

When a pond freezes over completely, harmful gases can accumulate. This heater ensures:

• Open water surface (hole)
• Oxygen supply
• Removal of harmful gases

This prevents stress and mortality among fish.

Efficient and energy-efficient operation

With a power of 150 watts, the heater offers sufficient capacity to keep a hole open while keeping energy consumption low.

Durable stainless steel heating element

The heater is made of stainless steel, which ensures:

• Long service life
• Reliable operation
• Resistant to winter conditions

Stable floating operation

Thanks to the tempex float, the heating element stays neatly in place, exactly where it is needed for optimal operation.

Flexible installation

The 5-metre cable provides sufficient length to easily place the heater at the desired location in the pond.

Maintenance-free and user-friendly

The heater is:

• Ready to use immediately
• Low maintenance
• Easy to use

Essential for winter pond maintenance

For pond owners, this is an indispensable tool to help fish safely through the winter.

Reliable quality from SuperFish

SuperFish is known for its durable and reliable pond products, making this heater a safe choice.

Peace of mind during cold periods

With the SuperFish Pond Heater, you choose an effective and safe solution to keep your pond ice-free and protect your fish from winter conditions.

The Eco 25 heater is very compact and designed for use in small aquariums. The Eco Heaters have a reliable thermostat for precise heating. Superfish recommends 1W per liter of water volume to ensure the correct water temperature.

The AstralPool 40 kW Titanium Heat Exchanger is a high-quality, powerful solution for efficiently heating swimming pool, spa, or biopool water. This heat exchanger is designed for use with an external heat source, such as a central heating boiler, heat pump, or solar heater, and ensures a fast and reliable transfer of heat to the pool water without direct contact between the different circuits.

Thanks to the use of titanium in both the secondary circuit housing and the primary circuit coil, this heat exchanger is highly corrosion-resistant and suitable for use with salt-water and chlorine pools. Titanium is known for its long lifespan, excellent thermal conductivity, and resistance to aggressive chemicals, making it a safe and durable choice for any type of pool installation.

The system operates using a dual-circuit configuration:

• The primary circuit is connected to your central heating system, heat pump, or other heat source and provides the heat supply.

• The secondary circuit circulates the pool water, which is heated indirectly.

This separation between the circuits prevents contamination of the pool water and ensures safe and efficient heat transfer.

With a capacity of 40 kW, this heat exchanger is extremely suitable for medium to large swimming pools. The heat exchanger has a primary operating pressure of up to 10 bar and a secondary operating pressure of up to 3 bar, ensuring reliability and versatility in various installations.

Key features:

• Capacity: 40 kW – suitable for larger swimming pools or spas

• Titanium coil & housing – resistant to salt, chlorine, and chemicals

• Primary circuit: connection to central heating boiler, heat pump, or solar heater

• Secondary circuit: heats pool or spa water efficiently and safely

• Primary operating pressure: up to 10 bar | Secondary operating pressure: up to 3 bar

• Compact design – easy to integrate into existing installations

• Easy to maintain, long lifespan, high performance

Whether you have a private pool, spa, or natural biopool, with the AstralPool 40 kW Titanium Heat Exchanger, you are choosing reliability, top performance, and an excellent investment in long-lasting comfort.

Owning a swimming pool is great, but it will usually need to be heated. This is easily done with Interline's Inverter Compact 2 - 4.5 kW Heat Pump.

This heat pump features inverter technology. This means that the heat pump is variable. The heat pump selects the power required to keep the pool water at the desired temperature and switches on earlier when the temperature drops. It then operates at a variable power level. You maintain the desired temperature and never use more energy than necessary. The heat pump has a high-quality compressor and titanium heat exchanger. The housing is made of high-quality ABS plastic with stainless steel. Ice defrosting, system pressure and protection functions of the flow switch ensure good product safety.

Professional Heater
The Professional Heater is specially designed for heating pond water or fish systems. Approximately 1,000 kcal are required to raise 1 cubic meter of water by 1 degree Celsius in 1 hour.

- With built-in thermostat
- 316L stainless steel housing
- Universal fittings included
- Water heating up to 40 degrees Celsius

Includes 25-32-40mm hose connection and 3-piece coupling with reducing piece, allowing for a permanent PVC bond for a 50mm and 63mm pipe.

- Profi-heater 1kW (860 kcal/h) pond volume 10,000 liters
- Profi-heater 2kW (1720 kcal/h) pond volume 20,000 liters
- Profi-heater 3kW (2580 kcal/h) pond volume 30,000 liters

Professional Heater
The Professional Heater is specially designed for heating pond water or fish systems. Approximately 1,000 kcal are required to raise 1 cubic meter of water by 1 degree Celsius in 1 hour.

- With built-in thermostat
- 316L stainless steel housing
- Universal fittings included
- Water heating up to 40 degrees Celsius

Includes 25-32-40mm hose connection and 3-piece coupling with reducing piece, allowing for a permanent PVC bond for a 50mm and 63mm pipe.

- Profi-heater 1kW (860 kcal/h) pond volume 10,000 liters
- Profi-heater 2kW (1720 kcal/h) pond volume 20,000 liters
- Profi-heater 3kW (2580 kcal/h) pond volume 30,000 liters

Polytropic Complete extension kit with enclosure and transparent display protective cover, for TFT display, cable length 10 m. Suitable for all pool heat pump models, except Morpheo, Verso and Urban

The W'eau Vertical Full Inverter 13kW pool heat pump is an excellent solution for pool owners with limited space in their garden. This heat pump offers several benefits and features:

High-Quality Heat Pump with Vertical Exhaust: The heat pump stands out due to its vertical cold air exhaust, making it ideal for installation in smaller gardens. This means less free space is required, and cold air is not blown onto patios or plants.

High Efficiency and Reliability: Thanks to the Full Inverter technology, the heat pump adjusts its power based on demand, resulting in energy savings. The heat pump switches on quickly when the temperature drops and operates efficiently.

Integrated Wi-Fi Module and 4 Programs: You can easily control the heat pump via your smartphone thanks to the integrated Wi-Fi module. The heat pump has several programs, including auto, eco, boost, and cooling, to meet your specific needs.

Quiet and Efficient: The heat pump operates quietly, with a maximum noise level of 34 dB at a distance of 10 meters. Thanks to the Full Inverter technology, the heat pump operates efficiently and does not consume more energy than necessary.

Excellent Efficiency: The heat pump has high efficiency, especially during the warmest summer months, which results in significant energy savings. This can extend the swimming season from April to October.

Compact Design and Easy Installation: The heat pump has a compact design and requires no free space on the side where the air is exhausted. The vertical exhaust makes installation more flexible. A bypass kit is required for installation and is not included as standard.

The W'eau Vertical Full Inverter 13kW pool heat pump is suitable for heating pools up to 52,000 liters, although its efficiency is optimal for pools up to 39,000 liters. With its high efficiency, energy-saving features, and user-friendly controls, this is an ideal choice for pool owners looking for reliable heating for their pools in limited spaces.

The W'eau Vertical Full Inverter 6kW pool heat pump is an efficient and space-saving solution for heating pools of up to 24,000 litres. Here are some key features and operating instructions for this heat pump:

Space-saving design with vertical cold air discharge:
- The unique design of this heat pump features vertical cold air discharge, making it perfectly suited for smaller gardens. This design offers installation flexibility and prevents cold air from being blown onto your patio or plants.

High-quality materials and reliability:
- The heat pump is made of high-quality ABS plastic, making it rust-proof. The heat pump is equipped with a Mitsubishi compressor, known for its reliability. The twisted titanium heat exchanger ensures optimal performance and excellent efficiency.

Efficient Full Inverter technology:
- The heat pump uses Full Inverter technology, which means it selects exactly the power required to keep your pool at the desired temperature. This results in lower energy consumption and a lower energy bill.

Integrated Wi-Fi module and programming options
- The heat pump is equipped with an integrated Wi-Fi module, allowing you to easily control it via your smartphone. You can set the temperature, select programmes, and even receive fault information. The heat pump has four programmes: auto, eco, boost, and cooling.

Efficiency and consumption:
- The efficiency of the W'eau Vertical Full Inverter 6kW is very high at high outdoor temperatures, making it extremely energy-efficient during the warmest summer months. It is also highly efficient at lower outdoor temperatures, allowing the swimming season to be extended.

Installation:
- The heat pump does not require free space on the side where the air is discharged, simplifying the installation process. Ensure there is 80 cm of free space at the back (suction side) of the unit. Connect the heat pump using a bypass kit (not included as standard) to regulate the flow to the heat pump. Install the bypass before the water flows to the heat pump.

The W'eau Vertical Full Inverter 6kW pool heat pump is designed to heat efficiently, reliably, and compactly, keeping your pool at a comfortable temperature.

Polytropic Luxury bypass installation kit for swimming pool heat pumps - HRS

Full Inverter 2.0 swimming pool heat pump 5.5 kW - W'eau

The latest generation of pool heating

The W'eau Full Inverter 2.0 5.5 kW is the latest generation of W'eau pool heat pumps. This series combines advanced Full Inverter technology with a modern design, a durable metal enclosure with a plastic protective layer, and smart features such as an interactive touchscreen and integrated Wi-Fi. This allows you to heat or cool your pool efficiently, quietly, and comfortably.

With a heating capacity of 5.5 kW, this heat pump is suitable for pools up to 22 m³. For optimal efficiency, a pool volume of approximately 16.5 m³ is recommended during the regular swimming season (May through August) and 14 m³ when you want to extend the swimming season from April to October.

Full Inverter technology

Full Inverter technology automatically adjusts the compressor and fan power to the heat demand. This means the heat pump almost never runs at maximum capacity, which ensures:

• Lower energy consumption
• Very quiet operation
• Constant water temperature
• Less wear and tear
• High efficiency up to COP 16.0 under ideal conditions

Updated 2.0 version

The Full Inverter 2.0 series stands out from the previous generation with several improvements:

• Durable metal enclosure with a plastic protective layer
• Interactive touchscreen for easy operation
• Advanced Better Defrost technology for faster defrosting at low outdoor temperatures
• Integrated Wi-Fi for control via the Weau app

These improvements ensure a longer lifespan, greater ease of use, and better performance during the pre- and post-season.

Heating and cooling

The heat pump features four different programs:

• Auto
• Eco
• Boost
• Cooling

This allows you to heat the pool in the spring and autumn and cool the water during warm summer days for added comfort.

High-quality components

The W'eau Full Inverter 2.0 is built with high-quality components for optimal performance and a long lifespan.

The heat pump features:

• Mitsubishi Twin Rotary compressor
• Twisted Titanium heat exchanger
• Brushless DC fan motor
• Integrated Wi-Fi
• 50 mm connection
• Environmentally friendly R32 refrigerant

The titanium heat exchanger is fully resistant to both chlorine and salt water, making the heat pump suitable for almost any type of pool.

Easy operation via touchscreen and Wi-Fi

The updated touchscreen makes operation clear and intuitive. You can also fully control the heat pump via the Weau app on your smartphone or tablet. This allows you to easily set the desired temperature, change the operating mode, and monitor the heat pump's operation.

Suitable for a long swimming season

The heat pump operates reliably at outdoor temperatures from -15°C to +43°C. This allows you to significantly extend the swimming season and enjoy pleasantly warm pool water early in the spring or late in the autumn.

Key benefits

• Suitable for pools up to 22 m³
• Recommended for 16.5 m³ during the regular season
• Recommended for 14 m³ for an extended swimming season
• Full Inverter technology
• COP up to 16.0
• Heating and cooling
• Metal enclosure with plastic protective layer
• Interactive touchscreen
• Better Defrost technology
• Wi-Fi control via the Weau app
• Mitsubishi Twin Rotary compressor
• Twisted Titanium heat exchanger
• Brushless DC fan motor
• Suitable for saltwater pools
• 50 mm connection
• 230 Volt power supply
• 2-year warranty on the heat pump and 7 years on the compressor and heat exchanger

Technical specifications

• Brand: W'eau
• Series: Full Inverter 2.0
• Capacity: 5.5 kW
• Model: WFI-005-M
• Maximum pool volume: 22 m³
• Recommended volume (May-August): 16.5 m³
• Recommended volume (April-October): 14 m³
• Maximum efficiency (COP): 16.0
• Operating temperature: -15°C to +43°C
• Heating temperature: 15°C to 40°C
• Cooling temperature: 8°C to 28°C
• Noise level at 10 meters: 20 - 28 dB(A)
• Compressor: Mitsubishi Twin Rotary
• Heat exchanger: Twisted Titanium
• Fan motor: Brushless DC
• Refrigerant: R32
• Water connection: 50 mm
• Power supply: 230 Volt / 1 phase
• Dimensions: 77 × 34 × 47 cm
• Weight: 43 kg
• Wi-Fi: Yes
• Touchscreen: Yes
• Better Defrost: Yes
• Functions: Heating and cooling

The W'eau anti-vibration mounts for mini heat pumps are designed to reduce vibrations and resonance from a compact pool heat pump. The set consists of four separate mounting feet made of anti-vibration rubber with an integrated aluminium profile. By placing the heat pump on these mounts, it does not stand directly on the ground, and vibrations are better absorbed.

This is particularly practical when a mini heat pump is placed on a hard surface such as concrete, tiles, or paving. Vibrations from the compressor and fan can be transmitted through such a surface. The rubber mounts limit this transmission and thus contribute to a quieter installation.

For mini heat pumps up to 40 cm deep

The set is intended for compact pool heat pumps with a maximum depth of 40 cm. This makes the anti-vibration mounts suitable for, among others, various W'eau Mini Power and Mini Inverter Plus heat pumps.

Always check the dimensions and mounting points of the heat pump before installation. For larger Full Inverter heat pumps, longer mounting bars of, for example, 45 or 60 cm are a more suitable solution.

Rubber with integrated aluminium profile

Each anti-vibration mount consists of black rubber with an integrated aluminium profile. The rubber provides the damping effect between the heat pump and the ground.

The aluminium profile forms the mounting point for the heat pump. This allows the unit to be securely mounted on the mounts without standing directly on the ground.

Reduces vibrations and resonance

A pool heat pump contains moving parts, including a compressor and fan. This causes slight vibrations during use. When the heat pump stands directly on a hard surface, these vibrations can be transmitted to, for example, paving, a concrete floor, or a patio.

By mounting the heat pump on rubber anti-vibration mounts, this direct connection is broken. This transfers less vibration to the ground and can reduce resonance.

Complete set for one mini heat pump

You receive four anti-vibration mounts, sufficient to support one suitable mini heat pump at four points. The required mounting hardware with bolts and nuts is included.

The feet have dimensions of approximately 230 × 140 × 160 mm each. Due to their compact size, they are designed for smaller pool heat pumps.

Installation

Place the four mounts on a flat, stable, and sufficiently load-bearing surface. Then position the heat pump on the mounts and align the mounting points with the aluminium profiles.

Using the included mounting hardware, the heat pump can then be attached to the mounts. Ensure that the heat pump is stable and level after installation, and leave sufficient free space around the unit according to the heat pump's installation instructions.

Important points

• Set of 4 anti-vibration mounts
• Specially for compact pool heat pumps
• Suitable for mini heat pumps up to a maximum of 40 cm deep
• Suitable for, among others, various W'eau Mini Power models
• Suitable for, among others, various W'eau Mini Inverter Plus models
• Reduces the transmission of vibrations to the ground
• Helps limit resonance and contact noise
• Made of anti-vibration rubber
• Equipped with an integrated aluminium profile
• Colour: black
• Includes bolts and nuts for installation
• Dimensions per mount: approximately 230 × 140 × 160 mm
• Four pieces for the installation of one suitable mini heat pump

Full Inverter swimming pool heat pump - 27.3 kW (three-phase power) - W'eau

The W'eau Full Inverter 27.3 kW was developed for the efficient heating and cooling of large swimming pools. Thanks to the advanced Full Inverter technology, the compressor automatically adjusts its power to the current heating demand. This means that the heat pump runs at a lower speed for most of the time, resulting in lower energy consumption, quieter operation, and a constant water temperature.

With a heating capacity of 27.3 kW, this heat pump is suitable for swimming pools up to approximately 122 m³. This makes it ideal for larger private swimming pools where a high heating capacity is desired. The pump also operates within a wide temperature range of -15°C to +43°C, allowing you to easily extend the swimming season from early spring to late autumn.

Full Inverter technology

Unlike traditional on/off heat pumps, a Full Inverter heat pump almost never runs at full power. The compressor and fan regulate themselves automatically, so that only the energy required to maintain the desired water temperature is used.

This offers several advantages:

• Lower energy consumption
• Less wear on the compressor
• More constant water temperature
• Whisper-quiet operation during normal use
• Higher efficiency throughout the swimming season

Suitable for salt and chlorine pools

The W'eau Full Inverter is equipped with a high-quality Twisted Titanium heat exchanger. Titanium is completely resistant to corrosion and therefore suitable for both traditional chlorine pools and saltwater swimming pools. This ensures that the heat exchanger continues to perform optimally for years.

The sturdy ABS enclosure is resistant to UV radiation and various weather conditions, so the heat pump can be installed outdoors without problems.

Heating and cooling

In addition to heating the pool water, this heat pump also has a cooling mode. During warm summer days, you can cool the pool water by a few degrees if desired for extra comfort.

The various operating modes allow you to easily adapt the operation to your situation:

• Auto
• Eco
• Boost
• Cooling

Smart control via Wi-Fi

The integrated Wi-Fi module makes it possible to easily control the heat pump via the Weau app on your smartphone or tablet. This allows you to set the desired temperature from anywhere and easily switch between the different programs.

High-quality components

The W'eau Full Inverter 27.3 kW is equipped with high-quality components that ensure a long service life and optimal performance.

This heat pump features:

• Mitsubishi Twin Rotary compressor
• Twisted Titanium heat exchanger
• Energy-efficient brushless DC fan motor
• Integrated Wi-Fi
• 50 mm connections
• R32 refrigerant

This combination ensures high efficiency, quiet operation, and excellent reliability.

Installation

The heat pump comes with standard 50 mm pipe connections, allowing it to be easily connected to most existing pool systems.

For optimal operation, a minimum water flow rate of 9 m³ per hour is recommended. This model operates on three-phase power (380-400 Volts) and is therefore ideally suited for larger installations.

Key features

• Suitable for pools up to 122 m³
• Capacity: 27.3 kW
• Full Inverter technology
• Heating and cooling
• Operating temperature between -15°C and +43°C
• Highly energy-efficient
• Mitsubishi Twin Rotary compressor
• Twisted Titanium heat exchanger
• Suitable for saltwater pools
• Sturdy ABS enclosure
• Integrated Wi-Fi via the Weau app
• Programs: Auto, Eco, Boost, and Cooling
• 50 mm connections
• Minimum water flow rate: 9 m³/hour
• Operates on three-phase power (380-400V)
• Warranty: 2 years on the heat pump and 7 years on the compressor and heat exchanger

Full Inverter swimming pool heat pump 21 kW - W'eau

Enjoy a comfortable swimming pool energy efficiently

The W'eau Full Inverter swimming pool heat pump 21 kW is designed for pool owners looking for a powerful, reliable and energy-efficient solution to keep their pool at the desired temperature. Thanks to the modern Full Inverter technology, the heat pump automatically adjusts its power to the heating demand. This means the compressor usually runs at a lower speed, resulting in lower energy consumption, quieter operation and a longer lifespan. This heat pump also features a cooling mode, allowing you to cool the pool water during hot summer days.

Suitable for pools up to 84 m³

With a heating capacity of 21 kW, this heat pump is suitable for pools up to approximately 84 m³. For maximum efficiency, using a pool cover is recommended. The heat pump requires a minimum water flow rate of 6.5 m³ per hour, making it easy to connect to most pool systems.

Full Inverter technology

The Full Inverter technology continuously regulates both the compressor and the fan, ensuring the heat pump never uses more power than necessary. This offers several advantages:

• lower energy consumption;
• very quiet operation;
• constant water temperature;
• longer lifespan;
• higher efficiency than traditional on/off heat pumps.

The heat pump features four operating modes:

• Auto;
• Eco;
• Boost;
• Cooling (cooling).

High efficiency

Thanks to the efficient inverter technology, the heat pump delivers excellent performance with low energy consumption. This allows you to enjoy pleasantly warm pool water at low running costs throughout the entire swimming season.

Durable materials

The heat pump features a robust ABS casing that is resistant to weather conditions and prolonged outdoor use. The high-quality Twisted Titanium heat exchanger is fully resistant to both chlorine and salt water, making it also suitable for pools with a salt electrolysis system.

Easy Wi-Fi control

With the integrated Wi-Fi module, you can easily control the heat pump via the W'eau app on your smartphone or tablet. This allows you to:

• set the desired temperature;
• switch between the different programs;
• control the heat pump remotely;
• view the current status of the heat pump.

This way, you always keep control of your pool temperature.

Extend the swimming season

The heat pump operates at outdoor temperatures from -15°C to +43°C, allowing you to easily extend the swimming season from early spring to late autumn.

Easy installation

Thanks to the 50 mm connections, the heat pump can be easily connected to almost any existing pool system. For optimal water flow, the use of a bypass kit is recommended.

Key benefits

• Full Inverter technology
• Heating and cooling
• Suitable for pools up to 84 m³
• Wi-Fi control via app
• Twisted Titanium heat exchanger
• Suitable for salt water pools
• Operates from -15°C to +43°C
• Very quiet operation
• Durable ABS casing
• 50 mm connection
• Mitsubishi Twin Rotary compressor
• Brushless DC fan motor

Technical specifications

• Brand: W'eau
• Capacity: 21 kW
• Suitable for pools: up to approx. 84 m³
• Minimum water flow rate: 6.5 m³/hour
• Compressor: Mitsubishi Twin Rotary
• Heat exchanger: Twisted Titanium
• Fan motor: Brushless DC
• Refrigerant: R32
• Casing: ABS
• Functions: heating and cooling
• Programs: Auto, Eco, Boost and Cooling
• Wi-Fi: integrated
• Suitable for salt water: yes
• Operating environment: -15°C to +43°C
• Connection: 50 mm
• Power supply: 230 Volt
• Warranty: 2 years on the heat pump and 7 years on the compressor and heat exchanger.

Manual

Manual Full Inverter swimming pool heat pump - 21 kW - W'eau

Full Inverter pool heat pump 13.5 kW - W'eau

Enjoy a pleasant pool temperature energy efficiently

With the W'eau Full Inverter pool heat pump 13.5 kW, you can keep the pool water at a comfortable temperature from early spring until late autumn. Thanks to the advanced Full Inverter technology, the compressor automatically adjusts its power to the heat demand. This means the heat pump usually runs at a lower speed, resulting in lower energy consumption, quieter operation, and a longer lifespan for the components. The heat pump also features a cooling mode, allowing the pool water to be cooled during hot summer days.

Suitable for pools up to 54 m³

With a maximum heating capacity of 13.5 kW, this heat pump is suitable for pools up to approximately 54 m³ under normal Dutch conditions. For optimal performance, a pool with a cover is recommended. The minimum required water flow rate is 4.5 m³ per hour, making the heat pump easy to combine with most pool filter systems.

Full Inverter technology

Full Inverter technology ensures that the compressor and fan continuously adjust their speed to the current heat demand. This results in:

• lower energy consumption;
• less noise;
• a more constant water temperature;
• a longer lifespan for the heat pump;
• more efficient operation than traditional on/off heat pumps.

The heat pump features several operating modes:

• ECO Inverter (extra quiet and energy-efficient);
• Boost Inverter (reaches temperature faster);
• Cooling (cooling the pool);
• Auto (automatic heating or cooling).

High efficiency

Under ideal conditions, the W'eau Full Inverter 13.5 kW achieves a COP of up to 16.0. This means that the heat pump can produce approximately 16 kWh of heat using just 1 kWh of electricity. The heat pump also continues to operate efficiently at lower outdoor temperatures thanks to the inverter control.

Saltwater resistant

The built-in threaded titanium heat exchanger is highly resistant to both chlorine and salt water. This also makes the heat pump suitable for pools with a salt electrolysis system.

Durable ABS enclosure

The robust ABS enclosure withstands a wide range of weather conditions and protects the internal components from external influences. This makes the heat pump suitable for long-term outdoor use.

Easy Wi-Fi control

You can easily control the heat pump from your smartphone or tablet via the free W'eau app. You can, among other things:

• set the desired temperature;
• change the operating mode;
• set timers;
• switch the heat pump on and off;
• view fault messages.

This way, you always keep control of your pool temperature, wherever you are.

Works almost the entire swimming season

The heat pump operates at outdoor temperatures from -15°C to +43°C. This makes it ideal for significantly extending the swimming season, from early spring until late autumn.

Easy installation

The heat pump features 50 mm glue connections and comes with:

• connection couplings;
• condensate drain;
• condensate hose;
• rubber vibration dampers;
• manual.

For optimal operation, using a bypass kit is recommended to precisely adjust the water flow.

Main benefits

• Full Inverter technology
• Heating and cooling
• Suitable for pools up to 54 m³
• COP up to 16.0
• Wi-Fi control via app
• Titanium heat exchanger
• Suitable for saltwater pools
• Operates from -15°C to +43°C
• Very quiet operation
• Robust ABS enclosure
• Automatic and manual defrost function
• 50 mm connection

Technical specifications

• Brand: W'eau
• Capacity: 13.5 kW
• Suitable for pool: up to approx. 54 m³
• Recommended pool size (with cover): 18 - 62 m³
• Minimum water flow rate: 4.5 m³/hour
• Power supply: 220-240 V / 50-60 Hz
• Maximum power consumption: 2.2 kW
• Maximum current: 10.2 A
• COP: 6.8 - 16.0
• Refrigerant: R32
• Heat exchanger: titanium
• Enclosure: ABS
• Water connection: 50 mm
• Heating temperature range: 8 - 40°C
• Cooling temperature range: 8 - 28°C
• Operating environment: -15°C to +43°C
• Noise level at 1 meter: 42 - 51 dB(A)
• Noise level at 10 meters: 22 - 31 dB(A)
• Dimensions: 896 × 389 × 641 mm
• Weight: 53 kg
• Water resistance: IPX4
• Horizontal air outlet
• Automatic and manual defrost function
• Wi-Fi control via app

Manual

Full Inverter pool heat pump manual - 13.5 kW - W'eau

Full Inverter swimming pool heat pump - 10.5 kW - W'eau

Energy-efficient heating and cooling for your swimming pool

The W'eau Full Inverter 10.5 kW swimming pool heat pump is an excellent choice for pool owners looking for a quiet, powerful and energy-efficient way to maintain their pool water at the desired temperature. Thanks to the Full Inverter technology, the heat pump automatically adjusts its power to the heating demand. This prevents unnecessary energy consumption and keeps the water temperature constant.

With a heating capacity of 10.5 kW, this heat pump is suitable for swimming pools up to 40 m³. For optimal efficiency during the swimming season from May through August, a pool volume of 30 m³ is recommended.

High efficiency and low energy costs

Thanks to the advanced inverter technology, the compressor only runs at the required power. This results in lower power consumption, less wear and tear and a longer lifespan. With a maximum efficiency (COP) of up to 1 in 15, you get a lot of heat from a minimal amount of electricity.

Sustainable quality

The W'eau Full Inverter is built with high-quality components that deliver reliable performance for years:

• Mitsubishi Twin Rotary compressor
• Twisted Titanium heat exchanger
• Brushless DC fan motor
• Suitable for saltwater swimming pools
• Wear-resistant ABS housing
• Operates at outdoor temperatures from -15°C to 43°C

The titanium heat exchanger is fully resistant to salt water and ensures efficient heat transfer.

Control your heat pump via Wi-Fi

With the integrated Wi-Fi module, you can easily control the heat pump via your smartphone. This allows you to set the desired temperature or choose another program, wherever you are.

Available programs:

• Auto
• Eco
• Boost
• Cooling (cooling)

Whisper-quiet in operation

Thanks to the Full Inverter technology, the fan usually runs at a low speed. This means the heat pump produces only 20 to 32 dB at a distance of 10 metres, so you can enjoy your pool and garden in complete peace and quiet.

Easy installation

The heat pump is equipped with standard 50 mm connections and can be easily connected to most pool systems. With a minimum required water flow of 3.5 m³ per hour, it is suitable for a wide range of filter pumps.

Dimensions

• Dimensions (L x W x H): 84 x 38 x 59 cm
• Weight: 43 kg
• Connection: 50 mm
• Voltage: 230 Volts
• Refrigerant: R32

Key benefits

• Suitable for swimming pools up to 40 m³
• Recommended for up to 30 m³ for optimal efficiency
• Full Inverter technology for maximum energy savings
• Heating and cooling
• Mitsubishi Twin Rotary compressor
• Twisted Titanium heat exchanger
• Suitable for saltwater swimming pools
• Very quiet in operation
• Wi-Fi control via smartphone
• Energy-efficient Brushless DC fan
• Operates at outdoor temperatures from -15°C to 43°C
• 50 mm connections
• 2-year warranty on the heat pump and 7-year warranty on the compressor and heat exchanger

Manual

Manual for Full Inverter swimming pool heat pump - 10.5 kW - W'eau

Full Inverter swimming pool heat pump - 7.6 kW - W'eau

Energy-efficiently heat and cool your swimming pool

The W'eau Full Inverter 7.6 kW swimming pool heat pump is an excellent choice for pool owners looking for an energy-efficient, quiet and reliable way to keep their pool at the right temperature. Thanks to the Full Inverter technology, the heat pump automatically adjusts its power to the heating demand. This means it consumes significantly less energy than traditional heat pumps and keeps the water temperature constant.

With a heating capacity of 7.6 kW, this heat pump is suitable for swimming pools up to 28 m³, with a recommended volume of 21 m³ for optimal use during the swimming season from May through August.

High efficiency and low energy costs

The advanced inverter technology ensures that the compressor never runs faster than necessary. This makes the heat pump more efficient, quieter and extends its lifespan. With a maximum efficiency (COP) of up to 1 in 15, you get multiple times the heat from every kWh of electricity.

Sustainable quality

The W'eau Full Inverter is built for years of use and features high-quality components:

• Mitsubishi Twin Rotary compressor
• Twisted Titanium heat exchanger
• Brushless DC fan motor
• Suitable for saltwater swimming pools
• Sturdy ABS housing
• Operates at outdoor temperatures from -15°C to 43°C

Thanks to the titanium heat exchanger, the heat pump is also suitable for swimming pools with a saltwater system.

Control your heat pump via Wi-Fi

With the integrated Wi-Fi module, you can easily control the heat pump via the W'eau app on your smartphone. Adjust the temperature, switch between the different programs, or check its operation wherever you are.

Available programs:

• Auto
• Eco
• Boost
• Cooling (cooling)

Whisper-quiet in operation

Due to the inverter control, the fan usually runs at a low speed. This means the heat pump produces only 20 to 32 dB at a distance of 10 metres, allowing you to enjoy your garden and pool undisturbed.

Easy installation

The heat pump comes with standard 50 mm connections and can easily be connected to most existing pool systems. With a minimum required water flow of 2.5 m³ per hour, it is suitable for most filter pumps.

Dimensions

• Dimensions (L x W x H): 84 x 38 x 59 cm
• Weight: 42 kg
• Connection: 50 mm
• Voltage: 230 Volts
• Refrigerant: R32

Key benefits

• Suitable for swimming pools up to 28 m³
• Full Inverter technology for maximum efficiency
• Heating and cooling
• Mitsubishi Twin Rotary compressor
• Twisted Titanium heat exchanger
• Suitable for saltwater
• Very quiet in operation
• Wi-Fi control via smartphone
• Energy-efficient Brushless DC fan
• Suitable for temperatures from -15°C to 43°C
• 50 mm connections
• 2-year warranty on the heat pump and 7-year warranty on the compressor and heat exchanger.

Manual

Manual for Full Inverter swimming pool heat pump - 7.6 kW - W'eau