Spa cleaning

The alkalinity of your spa water is essential for a stable pH level. When the alkalinity is in good condition, it prevents fluctuations in the pH and ensures a good water balance. The Spa Line Alkalinity Plus powder has been specially developed to increase the alkalinity of your spa or hot tub, so that your water remains optimal. This powder is an easy-to-use solution to ensure a stable pH, which is essential for maintaining crystal-clear water and the effectiveness of other water treatment products.

Features:

• Increases the alkalinity of the water

• Packaging: 1000 grams

• Brand: Spa Line

What is it

SpaBalancer UltraShock is an intensive cleaner based on active oxygen, developed for powerful disinfection of spa and hot tub water.

What is it used for

For carrying out a shock treatment in cases of contaminated water, biofilm formation, or bacterial load in spas and hot tubs.

What makes this product suitable

Unlike conventional disinfectants such as chlorine or bromine, UltraShock penetrates biofilm – the protective layer in which bacteria nestle. It breaks down the polysaccharides present and removes the biofilm structure, effectively eliminating the bacteria.

When to use

A shock treatment with UltraShock is recommended:

• After filling the spa for the first time
• When the water is cloudy or not crystal clear
• When there is an unpleasant odor
• When there is slimy residue on the walls
• After intensive use (e.g., a spa party)
• When chlorine, bromine, or other disinfectants are used regularly

UltraShock can also be used independently as a disinfectant, for example in wooden hot tubs without a filter system.

Benefits

• Based on active oxygen
• Very powerful disinfectant action
• Penetrates and removes biofilm
• Kills bacteria and Legionella
• Suitable for periodic shock treatment
• Can also be used independently for disinfection

Specifications

Type: shock treatment / disinfectant
Active base: active oxygen
Application: spas and hot tubs
Action: biofilm removal and bacterial disinfection

What is it

SpaBalancer Basic is an innovative, biological water treatment for spas that works without chlorine. The product keeps the water clear, clean and odorless naturally.

What is it used for

For maintaining spa and whirlpool water where comfort, skin-friendliness and minimal chemical load are central.

What makes this product suitable

SpaBalancer supports the natural pH balance of the water and works independently of water hardness or an ozonator. It reduces limescale and protects pumps, heaters, cushions and covers against corrosive vapors. This extends the lifespan of the spa installation and reduces maintenance costs.

Benefits

• Completely chlorine-free and biological
• Water remains clear, clean and odorless
• Only one measuring cup per week required
• Works at any pH level
• Suitable for hard and soft water quality
• No additional water treatment products required
• Less limescale and dirt buildup
• Extends the lifespan of pumps and heaters
• Skin-friendly, even for sensitive skin or neurodermatitis
• No red eyes or chemical odor
• Water only needs to be refreshed once a year

Specifications

Contents: 1 liter
Type: biological spa water treatment
Disinfection: chlorine-free
Application: spas and whirlpools
Usage: weekly dosage with measuring cup
Compatibility: works without an ozonator

Tube Clean Pipe Cleaner 500 ml – SpaLine

Tube Clean by SpaLine is a specialized pipe cleaner for spas and hot tubs, developed to remove dirt, biofilm, and soap residue from pipes and jets. This buildup is often not visible with normal water maintenance, but can negatively affect water quality and hygiene.

Thorough pipe cleaning
During use, dirt accumulates in pipes, jets, and hidden parts of the spa system. Tube Clean works deep within the piping and cleans where standard cleaning products cannot reach. Ideal for periodic maintenance and before changing the water.

Easy and effective to use
Add Tube Clean to the spa water before draining the spa. Let the jets run so that the product circulates through all the pipes. Afterwards, drain the spa and rinse it with clean water. This way, you start with a clean system and fresh water.

Essential for water changes
Regular use of Tube Clean prevents biofilm buildup, extends the lifespan of spa parts, and ensures cleaner, clearer water after every water change.

Usage

• Dosage: 25 ml per m³ of water

• Add product undiluted

• Let jets run for 10 minutes

• Then drain the spa and rinse with clean water

Key features

• Pipe cleaner for spa and hot tub

• Removes biofilm and dirt from pipes and jets

• Ideal before changing the spa water

• Easy to use

• Essential for hygienic water maintenance

• Contents: 500 ml

Kokido Filter Comb – For fast and thorough cleaning of pool filters

A properly functioning filter system is essential for clear and clean pool water. The Kokido Filter Comb is specially designed to make cleaning your pool filter – especially cartridge filters – easier, faster, and more effective. This handy tool helps remove dirt, hair, leaves, and caked-on residue from the pleats of your filter cartridge without having to scrub with your hands or waste valuable water.

The filter comb is equipped with sturdy, well-positioned teeth that penetrate deep between the filter pleats. By connecting the comb to a garden hose, dirt is not only loosened but also immediately washed away – for a deep cleaning in one simple step.

Key features:

• Deep cleaning of cartridge filters: Efficiently removes dirt, grease, hair, and limescale residue between the pleats.

• Water connection possible: Connect to a garden hose to immediately wash away dirt while combing.

• Sturdy teeth: Made of durable plastic that cleans effectively without damaging your filter.

• Time-saving and efficient: Makes filter cleaning faster and more thorough than manual rinsing.

• Universally applicable: Suitable for virtually all standard cartridge filters for hot tubs, above-ground pools, and swimming pools.

Usage tip: First rinse large debris from the filter. Then use the Kokido filter comb in combination with water pressure for a deep, even cleaning.

With the Kokido Filter Comb, you extend the lifespan of your filter cartridges and improve the performance of your pool system. An essential tool for any pool or hot tub owner who takes maintenance seriously.

The W’eau Outside Cleaner 1L is specially developed for cleaning the plastic exterior of spas and hot tubs. Due to weather conditions and regular use, the cabinet can become dirty over time and lose its original appearance. With Outside Cleaner, you remove stubborn dirt and help the surface shine again.

The liquid cleaner is suitable for both a thorough cleaning and regular maintenance of the exterior of your spa.

Removes stubborn dirt

W’eau Outside Cleaner is designed for plastic exterior surfaces of spas. The product helps to remove dirt and deposits and ensures that the exterior looks clean and well-maintained again.

Helps restore the shine

In addition to removing dirt, the cleaner helps to restore the shine of the plastic surface. By cleaning the exterior regularly, the cabinet of your spa will stay neat and well-maintained for longer.

Easy to apply

For a thorough cleaning, apply the Outside Cleaner to a dry cloth. Then clean the plastic exterior with circular motions until the dirt has disappeared and the surface shines again.

For regular maintenance, the product can be diluted. Always follow the current instructions on the packaging for the correct mixing ratio and safe application.

For regular maintenance

Outside Cleaner is not only suitable when the exterior is visibly dirty. You can also use the product during the regular maintenance of the spa. This prevents dirt from accumulating on the plastic cabinet over time.

Please note: this product is intended for the plastic exterior of the spa. For cleaning the shell, pipes, cover, or filter, cleaners specifically designed for those purposes are more suitable.

Key points

• Cleaner for the plastic exterior of spas
• Removes stubborn dirt and deposits
• Helps restore the original shine
• Suitable for regular maintenance
• Easy to apply with a dry cloth
• Can be polished with circular motions
• Can be diluted for regular maintenance
• Liquid formulation
• Contains 1 liter
• Specially developed for spa and hot tub maintenance

The W’eau Metal Clean 500 ml is a liquid spa maintenance product that helps prevent deposits from iron, copper and other minerals. These substances can be present in the water and, over time, cause unwanted buildup, stains and discoloration on the walls or floor of the spa.

Metal Clean reacts with metal contaminants in the water before they have the chance to attach to the spa as visible deposits. The product is primarily intended for use when you are changing the spa water.

Prevents metal and mineral deposits

Metals such as iron and copper can be present in the fill water. W’eau Metal Clean helps bind these metals and prevent discoloration and deposits. This makes the product a practical addition to your spa maintenance, especially if you regularly experience metal buildup.

Helps prevent stains and discoloration

Metal deposits can cause visible stains on the floor and walls of a spa. By using Metal Clean when changing the water, you reduce the chance that iron, copper and other minerals will deposit on the surface.

Use when changing the spa water

W’eau recommends using Metal Clean every time you change the spa water. First, turn off the filtration system and add the product evenly to the water. Then, turn the filtration back on so that the product is thoroughly distributed through the water.

For the exact dosage and application, we recommend always following the current instructions on the packaging.

Use safely

Do not add Metal Clean when people are in the spa. Use suitable protective gloves, keep the product out of reach of children and keep the packaging closed in a well-ventilated place. Always read the safety instructions on the label before use.

Key points

• Helps prevent metal deposits in the spa
• Targets iron and copper, among others
• Helps counteract other mineral deposits
• Reduces the chance of stains and discoloration
• Protects the walls and floor against unwanted deposits
• Suitable for use when changing spa water
• Liquid formulation
• Easy to add to the water
• Contains 500 ml
• Always follow the packaging for the exact application

The W’eau Jet Clean 500 ml is a pipe cleaner for thoroughly cleaning the internal plumbing of spas and whirlpools. Over time, greases, oils, dirt, minerals and other deposits can accumulate in the pipes. This contamination can provide a breeding ground for bacteria and promote the development of biofilm.

Jet Clean helps loosen and remove these deposits and biofilm from the plumbing. The product is used just before the spa water is changed, so that the loosened dirt can be drained out with the old water.

Removes biofilm from the pipes

Biofilm can build up on the inside of pipes and is therefore barely accessible with normal surface cleaning. Furthermore, this contamination can contribute to poorer water quality, reduced water flow and strain on the spa equipment.

Jet Clean specifically cleans these hard-to-reach parts of the spa and helps remove biofilm, grease, oil and dirt deposits from the plumbing system.

Use before draining the spa

For a thorough cleaning, Jet Clean is added to the warm spa water before you drain the spa. A supplier of this type of Jet Clean recommends approximately 15 ml per 1,000 liters of water. Then you run the jets for 15 minutes, let the water rest for 60 minutes and turn the jets on again for another 15 minutes. After that, the spa can be drained.

The filter is removed during this treatment. Clean the filter separately with a suitable filter cleaner.

Recommended every three months

For preventive maintenance, a thorough cleaning of the plumbing is recommended approximately once every three months. A logical time for this is when you are going to completely change the spa water anyway.

Regular cleaning prevents contamination from accumulating in the plumbing over the long term and contributes to a more hygienic spa system.

Also suitable for whirlpool baths

Jet Clean can be used not only for outdoor spas and hot tubs, but also for whirlpool bathtubs with internal plumbing and jets.

Key points

• Cleans the internal plumbing of spas
• Helps remove biofilm
• Removes dirt and grease deposits
• Helps remove oily contamination
• For use before changing the spa water
• Recommended dosage: approximately 15 ml per 1,000 liters
• Recommended cleaning: approximately every 3 months
• Helps reduce foaming
• Suitable for spas and whirlpools
• Also suitable for whirlpool bathtubs
• Contents: 500 ml
• Can be combined with chlorine, bromine and mineral disinfection systems

W’eau Foam Down defoamer 500 ml is a practical product for quickly removing foam from the water surface of spas, hot tubs, and whirlpools. Foam can be caused by residues of soap, shampoo, cosmetics, skin oils, sunscreen, or intensive use of the tub. With Foam Down, you can quickly make the water surface calmer and more comfortable again.

The product is specially suited for use in hot water and works immediately after application. This makes it ideal for spa maintenance when foam becomes visible during or after use. Foam Down helps the tub look neater and makes using the spa more pleasant.

Shake the bottle well before use and apply the product directly to the foam. Repeat the treatment when foam reappears. With regular or intensive use of the spa, it may be necessary to apply Foam Down more frequently.

Key points

• Defoamer for spas, hot tubs, and whirlpools
• Quickly removes foam from the water surface
• Suitable for hot water applications
• Ideal for foam caused by soap residues, cosmetics, and skin oils
• Practical for regular spa maintenance
• Works immediately after application
• Ensures a calmer and neater water surface
• Increases comfort during use of the spa
• Easy to apply directly to the foam
• Repeat when foam becomes visible again
• Suitable for regular or intensive use of the spa
• Supports clean and well-maintained spa water
• Contents: 500 ml

The W’eau Cover Shine 500 ml is specially developed for maintaining and protecting the cover of your spa or hot tub. A spa cover is constantly exposed to sunlight, rain, dirt, and other weather conditions. Cover Shine applies a protective layer that makes the cover water-repellent and prevents dirt from adhering to the surface as easily.

It also protects against UV radiation, discoloration, and weathering. Regular use helps keep the spa cover in good condition for longer and restores its shine.

Protects against sun and weather conditions

A spa cover endures a lot outdoors. UV radiation in particular can cause the material to discolor and deteriorate over time.

Cover Shine forms a protective layer and helps limit the effects of UV radiation and intense sunlight. At the same time, the surface becomes water-repellent, reducing the impact of rain and splashing water on the cover.

Dirt adheres less easily

After treatment with Cover Shine, dirt finds it harder to grip the surface. This keeps the cover looking well-maintained for longer and makes periodic cleaning easier.

For the best results, it is advisable to first clean and dry a heavily soiled cover before applying Cover Shine.

Restores the cover's shine

In addition to protection, Cover Shine also has a conditioning effect. By rubbing the product in with a dry, lint-free cloth, the surface regains its shine and well-maintained appearance.

Includes a convenient spray cap

The package contains 500 ml of liquid and comes with a spray cap. This allows you to apply the product easily and evenly over the spa cover. The contents are sufficient for multiple treatments, depending on the dimensions of the cover and the amount used.

Key points

• Protects the spa cover against weather conditions
• Helps protect against UV radiation
• Reduces discoloration and weathering
• Makes the cover water-repellent
• Ensures that dirt adheres less easily
• Restores shine to a dull cover
• Helps extend the lifespan of the spa cover
• Easy to apply
• Includes a convenient spray cap
• Contents: 500 ml
• Suitable for regular maintenance of spa and hot tub covers

Are you experiencing cloudy water in your spa? With W’eau Clear Water 1L, you can remove fine and suspended dirt particles from the water. It is a liquid flocculant that causes small dirt particles to clump together into larger particles, making them easier to remove from the water.

Clear Water is suitable for tackling soap residue, oil and other small dirt particles, among other things, which can give the water a cloudy appearance.

Makes fine dirt particles easier to remove

Some pollution in spa water consists of particles so small that they are difficult to remove from the water. Clear Water causes these fine and suspended particles to clump together. The larger particles can then be removed more easily, making the water clearer again.

Liquid and ready to use

W’eau Clear Water is supplied as a ready-to-use liquid. The liquid form makes the product easy to dose and add directly to the spa water. The product is suitable for both treating cloudy water and regular preventive use.

Also suitable for regular maintenance

Regular use is recommended for a permanently clear result. Toppy advises using the product once a week. Clear Water can also be combined with other products for the treatment and maintenance of spa water.

Use of W’eau Clear Water

Remove the spa filter before use and turn on the jets. Then add the required amount of Clear Water directly to the water and let the water circulate. Replace the filter as soon as the water is clear again. The online instructions differ in some points, and a recent user review also states that the label differs from the website. Therefore, always follow the instructions on the packaging for the exact dosage and contact time.

Never add the product while people are in the spa, and always read the safety instructions on the packaging before use.

Important points

• Liquid flocculant for spas
• Helps make cloudy spa water clear again
• Causes fine dirt particles to clump together
• Makes suspended pollution easier to remove
• Suitable for soap residue and oil, among other things
• Ready-to-use liquid formulation
• Easy to add directly to the water
• Suitable for regular and preventive use
• Can be combined with other water treatment products
• Contains 1 liter
• Always follow the packaging for the exact dosage

W’eau Citra Clean Spray 500 ml is a practical cleaning spray for cleaning surfaces around your pool or spa. With the ready-to-use spray, you can easily remove dirt and limescale and ensure that the pool or spa area looks well-maintained again.

Thanks to the convenient spray bottle, you can apply the cleaning agent directly to the area you want to treat. This makes Citra Clean ideal for regular maintenance and for tackling localized dirt.

Easy, targeted cleaning

Spray Citra Clean onto the surface to be cleaned and then treat the dirt according to the instructions on the packaging. The spray bottle makes it easy to apply the product evenly and in a controlled manner.

For the best results, it is advisable to clean surfaces regularly. This prevents dirt and limescale from accumulating over time and keeps the area around your pool, hot tub, or spa tidy.

Key features

• Ready-to-use 500 ml cleaning spray
• For pool and spa maintenance
• Convenient spray bottle
• Targeted application
• Helps remove dirt and limescale
• Suitable for regular maintenance
• Easy to use
• For pool and spa areas
• Practical for localized cleaning
• Contents: 500 ml
• Use according to the instructions on the packaging

The W’eau Acrylic Polish 500 ml has been specially developed for cleaning, caring for, and protecting acrylic surfaces. The product is ideal for the shell of a spa or jacuzzi, but can also be used on suitable acrylic bathtubs and shower enclosures.

The polish helps remove dirt, grease, stains, and minor surface damage. At the same time, it refreshes the shine of the acrylic, restoring the appearance of a dull surface.

Removes dirt and minor damage

When using a spa, dirt, skin oils, soap residue, and other contaminants can build up on the acrylic. W’eau Acrylic Polish is designed to thoroughly remove such contaminants without damaging the acrylic surface.

The polish can also reduce minor scratches, stains, and surface damage. For deep scratches or structural damage, a polish is not sufficient, and professional repair is recommended.

Restores the shine of the acrylic

In addition to cleaning, Acrylic Polish also nourishes the surface. By thoroughly buffing the product into the dry surface, the acrylic regains its shiny and well-cared-for appearance. This makes the product particularly suitable for the periodic maintenance of an acrylic spa.

Protective layer against new deposits

After treatment, a protective layer is left on the surface. This helps prevent the buildup of limescale and soap residue, making the surface easier to keep clean.

Easy to apply by hand

Shake the bottle well before use. Then apply the Acrylic Polish undiluted to a dry surface using a sponge or dry cloth. Spread the product using circular motions, allow it to dry for a few minutes, and then wipe away any remaining residue with a dry cloth.

Key features

• Specially developed for acrylic surfaces
• Cleans and cares for the surface
• Removes dirt and grease
• Helps remove stains
• Suitable for minor surface scratches
• Restores the shine of the acrylic
• Leaves a protective layer
• Helps prevent new limescale deposits
• Helps reduce soap residue and deposits
• Suitable for acrylic spas and jacuzzis
• Also suitable for acrylic bathtubs and shower enclosures
• Can be used undiluted
• Easy to apply with a sponge or cloth
• Contents: 500 ml

Directions for use

1. Shake the bottle well before use.
2. Make sure the acrylic surface to be treated is dry.
3. Apply Acrylic Polish undiluted using a sponge or dry cloth.
4. Spread the product using circular motions.
5. Allow the polish to dry for a few minutes.
6. Buff the surface with a clean, dry cloth for a beautiful, shiny finish.