Clear water

The HRS Flocculant 8 Cartridges 1 kg has been developed to remove fine, suspended impurities that are normally too small to be captured directly by the sand filter. The flocculant binds these small dirt particles together into larger flocs. This makes it easier for the sand filter to filter them out of the pool water.

For fine suspended dirt particles

Even when the water levels are good and the filter system is functioning correctly, very small dirt particles can remain in the pool water. This can make the water look less clear or slightly cloudy.

The HRS floc cartridges ensure that these small suspended particles are bound together. The formed flocs are larger and can therefore be stopped by the filter material.

Simply via the skimmer basket

It is easy to use. Place a floc cartridge in the skimmer basket. While the pool water is circulating, the product gradually dissolves and the flocculant is distributed throughout the pool. The bound dirt particles are then captured by the sand filter.

Only suitable for sand filters

According to HRS, these floc cartridges are intended exclusively for use in swimming pools with a sand filter system. They are therefore not intended for use with, for example, a cartridge or pattern filter.

8 cartridges of 125 grams

The package has a total content of 1 kg and, according to the current HRS catalog, consists of 8 cartridges of 125 grams each. This makes the cartridges easy to use individually without having to measure out loose flocculant for every treatment.

Important points

• Binds fine, suspended dirt particles together
• For impurities that cannot be filtered directly
• Supports the clarification of pool water
• Specially for use with sand filters
• Easy to place in the skimmer basket
• Gradually dissolves during water circulation
• Dirt flocs are then captured by the sand filter
• For easy and measured application
• Package with 8 floc cartridges
• Weight per cartridge: 125 grams
• Total content: 1 kg
• Store dry and well sealed

Liquid flocculant 1L - CTX is an effective aid for clarifying cloudy pool water. The product binds fine dirt particles together into larger flocs, so they are more easily captured by the filter system or can be removed via the waste setting.

This flocculant can be used both preventatively and curatively. Preventatively, it helps keep the water beautifully clear, while it can be used for cloudy water to visibly improve the water quality. Ideal for swimming pools where small suspended particles are not well removed by the filter.

Key points

• Liquid flocculant for pool water
• Helps make cloudy water clear again
• Suitable as a preventive and curative treatment
• Binds fine dirt particles together into larger flocs
• Supports the operation of the filter system
• Can be used with filtration switched on
• Apply in the absence of swimmers
• Suitable for use in the pool
• Easy to dose
• Practical 1-liter packaging

Use and dosage

Always use the product with the filtration switched on and without swimmers in the water. Pour the flocculant directly into the pool. Then let the water rest and vacuum up the clumped dirt with the valve in the waste setting.

Dosage:
Cloudy water: 1 liter per 100 m³
Preventive use: 0.5 liters per 100 m³

Why use flocculant?

Some dirt particles are so small that they are difficult for the pool filter to catch. By adding flocculant, these particles are brought together into larger flocs. This allows the filter to capture them more effectively or makes them easier to remove. This keeps the pool water clear, fresh, and attractive to swim in.

Blue Water Care Anti-Algae 5 ltr - Interline

Interline Blue Water Care is the successor to Interline Anti-Algae and helps effectively prevent green and cloudy pool water. The powerful water conditioner causes algae and fine dirt particles to clump together into larger flakes, so they can be easily removed from the water.

The product is suitable for inflatable, above-ground and in-ground pools, both with and without a filter system. In addition, Blue Water Care can be used as an overwintering fluid to prepare the pool for winter.

Benefits

• Prevents green pool water
• Ensures clear and clean swimming water
• Clumps algae and fine dirt particles together
• Ideal after a chlorine shock treatment
• Suitable for pools with and without a filter system
• Also suitable for preparing the pool for winter

Usage and dosage

First remove visible dirt from the pool with a skimmer net. Perform a chlorine shock treatment if necessary and then wait 24 hours before adding Blue Water Care.

Dosage

• Maximum 500 ml per 50 m³ of pool water.

Application with a filter system

Add the product to the pool water and let the pump run for approximately 3 hours for proper distribution. Backwash the filter if necessary until the water is clear again.

Application without a filter system

Distribute Blue Water Care evenly over the water surface. Allow the formed flakes to settle and then remove the settled dirt with a pool vacuum.

Overwintering

Also use Blue Water Care when preparing the pool for winter. Repeat the treatment in late January for optimal results.

Blue Water Care Anti-Algae 1 ltr - Interline

Interline Blue Water Care is the successor to Interline Anti-Algae and helps effectively prevent green and cloudy pool water. The powerful water conditioner causes algae and fine dirt particles to clump together into larger flakes, so they can be easily removed from the water.

The product is suitable for inflatable, above-ground and in-ground pools, both with and without a filter system. In addition, Blue Water Care can be used as an overwintering fluid to prepare the pool for winter.

Benefits

• Prevents green pool water
• Ensures clear and clean swimming water
• Clumps algae and fine dirt particles together
• Ideal after a chlorine shock treatment
• Suitable for pools with and without a filter system
• Also suitable for preparing the pool for winter

Usage and dosage

First remove visible dirt from the pool with a skimmer net. Perform a chlorine shock treatment if necessary and then wait 24 hours before adding Blue Water Care.

Dosage

• Maximum 500 ml per 50 m³ of pool water.

Application with a filter system

Add the product to the pool water and let the pump run for approximately 3 hours for proper distribution. Backwash the filter if necessary until the water is clear again.

Application without a filter system

Distribute Blue Water Care evenly over the water surface. Allow the formed flakes to settle and then remove the settled dirt with a pool vacuum.

Overwintering

Also use Blue Water Care when preparing the pool for winter. Repeat the treatment in late January for optimal results.

Melpool PAC Liquid Flocculant 5L helps to make cloudy pool water clear again. The product binds very small suspended dirt particles together into larger flocs. These larger particles can then be more easily captured by the filter system or removed from the pool.

Fine pollution is sometimes too small to be directly stopped by the pool filter. This can cause the water to remain dull or cloudy, even when the pH and chlorine levels are correct. By using liquid flocculant, the filtration process is supported and the pool water can become visibly clearer.

The generous 5-liter package is suitable for regular use and for larger swimming pools. Always check the water levels before use and ensure that the pH level is within the desired range. Dose the product according to the instructions on the packaging and always add pool chemicals separately.

Important points

• Liquid flocculant for pool water
• Volume of 5 liters
• Binds small suspended dirt particles together
• Helps to make cloudy pool water clear
• Supports the operation of the filter system
• Suitable for fine particles that the filter normally does not capture
• Generous package for regular use
• Suitable for larger swimming pools
• Easy to dose as a liquid
• Check the pH and water levels beforehand
• Dose according to the instructions on the packaging
• Always add pool chemicals separately
• Do not allow swimmers in the water during treatment
• Check the water levels again before using the pool
• Store in a dry, cool place and out of reach of children

Melpool PAC Liquid Flocculant 1L helps to make cloudy pool water clear again. The product binds very small suspended dirt particles together into larger flakes, so they can be more easily captured by the filter system or removed from the pool.

Fine dirt particles are sometimes too small to be stopped directly by the filter. This can cause the pool water to remain dull or cloudy, even when the pH and chlorine levels are correct. By using liquid flocculant, these particles are brought together, which supports the filtration process and can make the water visibly clearer.

Always check the water levels before use and ensure that the pH level is at the correct level. Dose the product according to the instructions on the packaging and do not use it at the same time as other pool chemicals. Do not allow swimmers in the water during treatment and check the pool water again before the pool is used again.

Important points

• Liquid flocculant for pool water
• Volume of 1 liter
• Binds small suspended dirt particles together
• Helps to make cloudy pool water clear
• Supports the operation of the filter system
• Suitable for fine particles that the filter normally does not capture
• Easy to dose as a liquid
• Suitable for periodic pool maintenance
• Check the water levels and pH first
• Always follow the dosing instructions on the packaging
• Add pool chemicals separately
• Do not use when there are swimmers in the water
• Check the water levels after treatment
• Store in a dry, cool place and out of reach of children

SpaClarity Water Care Set – complete solution for clear and hygienic spa water

The SpaClarity water care set is a complete and well-thought-out solution for maintaining pure, clear and hygienic spa water. Thanks to the innovative 2-component system, this set ensures that contaminants are effectively addressed and the water remains in optimal condition. This makes the set particularly suitable for spa owners who strive for consistently clean water and minimal maintenance problems.

2-component system for optimal water purification

The unique SpaClarity system consists of two components that work together to address contaminants in the water. SpaClarity 1 and 2 ensure that even the smallest dirt particles are brought together into larger particles (flocculation), making them easier to capture by the filter system. This results in visibly clearer water and more efficient filtration.

Supports hygiene in combination with chlorine

In combination with the included chlorine, SpaClarity helps prevent bacteria from multiplying in the spa water. This contributes to a safe and hygienic spa environment. The combination of chemical and mechanical cleaning provides a complete maintenance system.

Cooperation with ozonator and UV-C system

The set perfectly suits spas that use an ozonator and/or UV-C lamp. These systems help destroy organic contaminants, while SpaClarity ensures that the remaining fine particles are effectively removed through filtration. This provides an integrated and efficient water treatment.

Supports efficient filter operation

Because dirt particles clump together, the filter system can work more efficiently. For optimal performance, it is recommended to clean the filter weekly with a suitable cleaning agent, such as a filter cleaner. This helps maintain flow and filtration capacity.

Complete set for immediate use

The SpaClarity maintenance set contains all the essential components to get started immediately with spa maintenance:

• SpaClarity 1 (2 liters)
• SpaClarity 2 (2 liters)
• Measuring cup
• 25 spa chlorine tablets
• Chlorine floater
• User manual

This complete composition makes the product particularly user-friendly and suitable for both new and experienced spa users.

Consistent water quality and fewer maintenance problems

Through regular use of SpaClarity, the spa water remains clear, hygienic and better balanced. This reduces the chance of cloudy water and accumulation of contaminants, making maintenance easier and more efficient.

W'eau Metal Net 1 Liter

W'eau Metal Net is a liquid water treatment product that effectively removes lime, iron, and other metals from pool water. This prevents discoloration, deposits, and cloudy water and helps maintain stable water quality.

Application when filling the pool

Add 30 centiliters per 10 m³ of water while the filtration system is running. Allow the product to circulate for 2 full days. Then backwash the filtration system.

Application for an in-use pool

Add 20 centiliters per 10 m³ of water, once or twice a season. Run the filtration system continuously for 2 full days. Then backwash the filtration system.

Important information

This product is a water treatment product, not a filtration system. Filter media is not applicable. Application requires a functioning filtration system.

W'eau Metal Net helps keep pool water clear and sparkling by effectively binding unwanted metals and removing them through the filtration system.

W’eau 2-in-1 Flocculant Tablets

Enjoy crystal-clear pool water all season long. The W’eau 2-in-1 Flocculant Tablets bind even the smallest suspended particles into larger flocculant particles that sink to the bottom and are easily removed by your filtration system. This reduces the risk of algae growth and keeps the water crystal clear.

Why choose W’eau?

• Crystal-clear water – removes fine particles that standard filters miss.

• Algae control – inhibits algae growth with regular use.

• Convenient & economical – one tablet per week is often enough.

• Fast results – visibly clearer water in a short time.

Directions for Use

1. Maintenance dosage: Place 1 tablet per week in the skimmer when the water is clear.

2. Fast clarification: For cloudy water or early algae growth, use 2 tablets at the same time.

3. Repeat the treatment weekly throughout the entire swimming season.

Safety Instructions

Store the tablets in a dry, cool place and always in a tightly closed container. Keep out of reach of children. Read the safety instructions on the label before use.

The HRS Liquid Flocculant 5L is designed to remove very fine suspended dirt particles from pool water. Some contaminants are so small that they can pass through the filter material. The flocculant binds these small particles together into larger flakes, so they can be more easily removed from the water.

For clear pool water

In the pool water, the product forms flakes that attract suspended dirt particles. These flakes are removed from the water through the filter system along with the attached dirt. This makes the product particularly suitable when the pool water remains cloudy despite normal filtration.

Suitable for sand and glass filters

HRS states that the liquid flocculant is suitable for sand filters filled with filter sand or filter glass. The product is not suitable for diatomaceous earth filters and cartridge filters.

After treatment through a sand filter, HRS advises backwashing the filter so that the collected dirt is removed from the filter system. If necessary, the treatment can be repeated.

Dosage via skimmer or overflow

When used in combination with a suitable filter system, the liquid flocculant is added via the skimmer or overflow. For normal suspended dirt, HRS recommends a maximum of 3 cl per m³ of pool water. For heavy pollution, this can be increased to 5 cl per m³. The required amount may vary due to, among other things, weather conditions and the use of the pool.

Also usable without a filter system

According to HRS, the product can also be used when no pump-filter installation is being used. For this, 10 cl per m³ is spread over the water surface. After the flocculated dirt has settled to the bottom, it can be removed with a pool vacuum.

Works within a wide pH range

According to HRS, the liquid flocculant is active at a pH value between 5 and 9.5. For proper pool water treatment, it naturally remains important to regularly test the water values and correct them where necessary.

Important points

• Binds fine suspended dirt together into larger flakes
• Helps clear cloudy pool water
• Suitable for sand filters with sand or glass filling
• Not suitable for cartridge filters
• Not suitable for diatomaceous earth filters
• Can also be used without a filter system
• Dosage via skimmer or overflow possible
• Recommended dosage for suspended dirt: up to 3 cl per m³
• Recommended dosage for heavy pollution: 5 cl per m³
• Without filter system: 10 cl per m³
• Backwash the sand filter after filtration
• Active within a pH range of 5 to 9.5
• Liquid application
• Contents: 5 liters

The HRS Liquid Flocculant 1L was developed to remove very fine suspended dirt particles from pool water. Some dirt particles are so small that they are not effectively captured by the filter system. The liquid flocculant binds these particles together into larger clumps, so they can be more easily filtered out of the water.

For clear pool water

In the pool water, the product forms clumps that attract fine suspended particles. The formed clumps are then removed from the water by the sand filter along with the attached dirt. This makes the product particularly suitable when the pool water remains cloudy despite normal filtration.

Suitable for sand and glass filters

HRS states that the liquid flocculant is suitable for sand filters filled with filter sand or filter glass. The product is not suitable for pattern filters/cartridge filters or diatomaceous earth filters.

After treatment, it is recommended to backwash the sand filter. This removes the captured dirt particles from the filter. If necessary, the treatment can be repeated until the water is clear again.

Dosage via skimmer or overflow

The liquid flocculant can be added via the skimmer or overflow. For suspended dirt, HRS recommends up to 3 cl per m³ of pool water. In cases of heavy pollution, 5 cl per m³ can be applied. These are guidelines; the required amount may vary due to, among other things, weather conditions and the extent to which the pool is used.

Also usable without a filter system

Do you not have a pump-filter system? The HRS Liquid Flocculant can also be used in this case. HRS recommends distributing 10 cl per m³ over the water surface. After the formed clumps with the dirt have settled to the bottom, the settled dirt can be removed with a pool vacuum.

Active within a wide pH range

According to HRS, the flocculant is active at a pH value between 5 and 9.5. For proper pool water treatment, it remains important to regularly check the water values and correct them where necessary.

Key points

• Binds fine suspended dirt together into larger clumps
• Helps clear cloudy pool water
• Suitable for sand filters with sand or glass media
• Not suitable for pattern and cartridge filters
• Not suitable for diatomaceous earth filters
• Can also be used without a filter system
• Add via skimmer or overflow
• Recommended dosage for suspended dirt: up to 3 cl per m³
• Recommended dosage for heavy pollution: 5 cl per m³
• Without a filter system: 10 cl per m³
• Backwash the sand filter after treatment
• Active at a pH value of 5 to 9.5
• Contents: 1 liter

The HRS O-Clear Anti-algae/Flocculant 5L is a liquid pool water treatment product that combines two functions. It helps prevent and control algae growth while also helping to keep the pool water clear. HRS classifies the product itself within the anti-algae/flocculant category.

For clear pool water

During the swimming season, algae and fine impurities can make the water green, dull, or cloudy. O-Clear supports water treatment and helps keep the pool water clear. The flocculating action helps bring fine suspended particles together, so they can be more easily removed by the filtration system.

Helps prevent algae growth

In addition to its flocculating action, O-Clear is used to help prevent and control algae growth in swimming pools. It can therefore be used during the swimming season as part of regular water maintenance. However, the product does not replace checking the pH level and the normal disinfection of the pool water.

Easy to add directly

O-Clear is liquid and can be added directly to the pool water. Sufficient circulation and filtration are important for effective operation. This allows the bound dirt particles to be removed from the water by the filtration system.

Dosage and use

Different dosage guidelines exist for O-Clear. A product listing for the same O-Clear formula recommends 0.5 liters per 25 m³ once a week, while other current suppliers list lower maintenance dosages. Therefore, for this HRS version, always follow the dosage on the current packaging label. Do not use O-Clear at the same time as a chlorine shock; available product information recommends allowing at least 24 hours between the two treatments.

Key points

• Combination of anti-algae and flocculant
• Helps prevent and control algae growth
• Supports clear pool water
• Helps remove fine suspended impurities
• Supports the operation of the filtration system
• Suitable for regular pool maintenance
• Liquid and easy to add
• Can be added directly to the pool water
• Good circulation and filtration are important
• Do not use at the same time as a chlorine shock
• Allow at least 24 hours between O-Clear and a chlorine shock
• Dosage according to the current label
• Blue liquid
• Contents: 5 liters

W’eau Liquid Flocculant 5L was developed for pool owners who strive for crystal-clear pool water. In pool water, very small dirt particles and residues can remain suspended that are not always immediately captured by the filter system. This can cause cloudy water and a less fresh appearance of the pool.

This liquid flocculant causes these fine particles to clump together into larger flakes, so they can be more easily removed by the filter system. In this way, the product improves the water quality and helps to keep the pool water clear, clean, and attractive. MaJa Koi describes W’eau liquid flocculant as a reliable choice for pool owners who want a summer full of clear swimming pleasure.

Key points

• Causes small dirt particles and residues to clump together
• Makes fine particles easier to remove via the filter system
• Helps make cloudy pool water clear again
• Supports better water quality
• Ideal for regular pool maintenance
• Suitable for use in pool water that looks dull or milky
• Practical liquid formula for easy application
• Contributes to clean and attractive swimming water
• Reliable choice for clear water during the swimming season
• Contents: 5 liters

W’eau Liquid Flocculant 1L is an effective solution for pool water that looks cloudy, dull, or less clear. Fine dirt particles and residues often remain suspended in pool water that are too small to be captured directly by the filter system. This liquid flocculant causes these small particles to clump together into larger flakes, so they can be filtered out of the water more easily.

By using flocculant regularly, the pool water remains clearer and fresher. The product supports the operation of the filter system and helps visibly improve the water quality. The 1-liter package is practical for targeted maintenance and ideal for private pools that need to maintain clear and attractive water during the swimming season.

Key points

• Causes fine dirt particles and residues to clump together
• Makes small particles easier to remove via the filter system
• Helps make cloudy pool water clear again
• Supports better water quality
• Ideal for regular pool maintenance
• Suitable for dull, milky, or less clear swimming water
• Practical liquid formula for easy dosing
• Supports the operation of the pool filter
• Contributes to clean, fresh, and attractive swimming water
• Contents: 1 liter

Are you experiencing cloudy water in your spa? With W’eau Clear Water 1L, you can remove fine and suspended dirt particles from the water. It is a liquid flocculant that causes small dirt particles to clump together into larger particles, making them easier to remove from the water.

Clear Water is suitable for tackling soap residue, oil and other small dirt particles, among other things, which can give the water a cloudy appearance.

Makes fine dirt particles easier to remove

Some pollution in spa water consists of particles so small that they are difficult to remove from the water. Clear Water causes these fine and suspended particles to clump together. The larger particles can then be removed more easily, making the water clearer again.

Liquid and ready to use

W’eau Clear Water is supplied as a ready-to-use liquid. The liquid form makes the product easy to dose and add directly to the spa water. The product is suitable for both treating cloudy water and regular preventive use.

Also suitable for regular maintenance

Regular use is recommended for a permanently clear result. Toppy advises using the product once a week. Clear Water can also be combined with other products for the treatment and maintenance of spa water.

Use of W’eau Clear Water

Remove the spa filter before use and turn on the jets. Then add the required amount of Clear Water directly to the water and let the water circulate. Replace the filter as soon as the water is clear again. The online instructions differ in some points, and a recent user review also states that the label differs from the website. Therefore, always follow the instructions on the packaging for the exact dosage and contact time.

Never add the product while people are in the spa, and always read the safety instructions on the packaging before use.

Important points

• Liquid flocculant for spas
• Helps make cloudy spa water clear again
• Causes fine dirt particles to clump together
• Makes suspended pollution easier to remove
• Suitable for soap residue and oil, among other things
• Ready-to-use liquid formulation
• Easy to add directly to the water
• Suitable for regular and preventive use
• Can be combined with other water treatment products
• Contains 1 liter
• Always follow the packaging for the exact dosage