Phosfree 1L - AquaForte

AquaForte PhosFree 1 Liter – Phosphate Remover for Clear and Algae-Free Swimming Water

AquaForte PhosFree 1 liter is a powerful, specially developed product to effectively remove phosphates from swimming ponds and swimming pools. Phosphates provide a nutrient source for algae. By eliminating phosphates, the growth and presence of algae are significantly reduced, resulting in clear and healthy swimming water.

This solution is based on Lanthanum Chloride (21.5%), a proven active ingredient that binds and neutralizes phosphate particles. This makes the product fast and efficient, without harmful effects on humans or nature, provided it is applied correctly.

Thanks to the integrated dosing chamber, it is easy to measure and dose accurately. PhosFree is suitable for both the initial treatment for high phosphate levels and for the ongoing maintenance of water quality.

Application – Initial treatment (for high phosphate levels):

1. Measure the phosphate level with a test kit.

2. Thoroughly clean the filter system.

3. Calculate the required amount of PhosFree.

4. Pour the product evenly over the water surface while the filter is running.

5. Leave the filter running for at least 24 hours.

   • If pressure increases to >0.7 bar: clean the filter.

6. Measure the phosphate level again after 48 hours. If necessary: repeat the treatment.

Maintenance dosage:

• Add 60 ml per 50,000 liters (50 m³) while the filter system is running.

• No swimmers in the water during dosing.

• Adjust the dosage if necessary, depending on water quality and weather conditions.

Important:
After addition, the water may become temporarily cloudy. This is a normal phenomenon and indicates that the product is doing its work. The cloudiness usually disappears after a few minutes.

Use of the dosing chamber:

1. Hold the bottle upside down to fill the dosing chamber.

2. Loosen the cap.

3. Pour the product from the dosing chamber into the water.

4. For specific volumes: hold the bottle at an angle until the correct amount flows into the chamber.

Features:

• Contents: 1 liter

• Active ingredient: Lanthanum Chloride 21.5%

• Suitable for swimming ponds and swimming pools

• Removes phosphates, prevents algae growth

• Safe to use when applied correctly

• Easy to dose with dosing chamber

With AquaForte PhosFree 1 liter, you effortlessly maintain clear, clean, and healthy swimming water – free from unwanted algae and with minimal maintenance effort.