pH plus granules 1kg - HRS

With HRS pH Plus Granules 1 kg, you can easily increase a pH level that is too low in the pool water. A correct pH level forms the basis of a good water balance and is important for the effectiveness of other water treatment products. HRS recommends a pH level between 7.0 and 7.4.

For increasing a pH level that is too low

When a water test shows that the pH level is too low, you can correct it with pH Plus. HRS indicates that, depending on the hardness of the water, approximately 40 to 100 grams per 10 m³ of pool water is needed to increase the pH by approximately 0.1. Because the required amount depends on the water composition, it is important to measure again in between.

Fast-dissolving granules

The product consists of fast-dissolving granules. HRS recommends first dissolving the required amount in a bucket of warm water. Always add the product to the water, and not the other way around. The solution can then be distributed evenly over the pool.

Measure first, then correct

Always check the current pH level of the pool water before use. Then add the required amount and let the water circulate well. Check the pH level again after treatment before potentially adding pH Plus again. The exact amount depends on factors including water hardness.

Important points

• Increases a pH level that is too low
• For treating pool water
• Fast-dissolving granules
• Contents of 1 kg
• Ideal pH level according to HRS: 7.0 – 7.4
• Guideline: 40 – 100 grams per 10 m³ increases the pH by approximately 0.1
• Exact required amount depends on water hardness
• First dissolve in a bucket of warm water
• Always add the granules to the water, not the other way around
• Measure the pH level before use
• Check the pH level again after treatment
• Store dry after use