OaseFol Primer 750ml - Oase

OaseFol Primer 0.75 Litre

The OaseFol Primer 0.75 Litre has been specially developed for preparing and activating EPDM pond liner before OaseFol SeamTape or OaseFol Flashing is applied. Proper pre-treatment is essential for a reliable bond when gluing liner sections together and carrying out repairs.

The primer cleans and activates the surface of the EPDM liner, optimally preparing it for further processing. OaseFol Primer is suitable for both OaseFol EPDM liner and EuroFol EPDM liner, making it an important component in professional liner bonding.

Optimal preparation of EPDM liner

When bonding or repairing EPDM liner, a properly prepared surface is of great importance. Contaminants and an insufficiently activated surface can affect the adhesion of the tape or flashing used.

OaseFol Primer is applied to the relevant liner surface before applying the SeamTape or Flashing. This cleans and activates the surface, making it ready for the next step in the processing procedure.

For bonding and repairing pond liner

The primer is suitable for various tasks involving EPDM pond liner. It can be used when two pieces of liner need to be bonded together, but also when existing liner needs to be repaired.

In combination with OaseFol SeamTape, the primer can be used for creating liner bonds and seams. For tasks involving OaseFol Flashing, the primer also provides the necessary surface preparation.

This makes the product suitable for both installing a new liner pond and carrying out maintenance and repair work on existing EPDM liner.

Suitable for OaseFol and EuroFol EPDM

OaseFol Primer was developed for use in combination with:

• OaseFol EPDM liner
• EuroFol EPDM liner
• OaseFol SeamTape
• OaseFol Flashing

By using products designed to work together, the entire liner bond can be constructed according to the intended system.

Consumption of OaseFol Primer

One package contains 0.75 litres of primer. The stated material consumption is approximately 20 linear metres of seam per litre of OaseFol Primer.

Actual consumption may depend on the application and the way the product is applied. Always ensure that the entire surface on which the tape or flashing is applied is correctly prepared during processing.

Application

Before you start, ensure that the relevant section of the EPDM liner is suitable for further processing. Then apply OaseFol Primer to the area where SeamTape or Flashing will later be placed.

After pre-treatment, the relevant bond or repair can be further finished with the appropriate OaseFol product. Always follow the corresponding Oase processing instructions during application.

Benefits of OaseFol Primer

• Pre-treatment for EPDM pond liner
• Cleans and activates the liner surface
• For use before applying OaseFol SeamTape and Flashing
• Suitable for OaseFol EPDM liner
• Suitable for EuroFol EPDM liner
• Ideal for liner bonds and repair work
• Volume of 0.75 litres
• Material consumption of approximately 20 linear metres of seam per litre
• Part of the OaseFol liner system
• Suitable for professional processing of EPDM pond liner

Specifications

Brand: Oase
Product: OaseFol Primer
Volume: 0.75 litres
Application: Pre-treatment and activation of EPDM liner
Suitable for: OaseFol EPDM and EuroFol EPDM
Can be used with: OaseFol SeamTape and OaseFol Flashing
Material consumption: approx. 20 linear metres of seam per litre
Shelf life: 12 months

Proper preparation for a reliable liner bond

With the OaseFol Primer 0.75 Litre, you prepare OaseFol and EuroFol EPDM pond liner for the application of SeamTape or Flashing. The primer cleans and activates the surface and is therefore an important preparatory step when creating liner bonds or carrying out repairs.

Whether you want to bond different pieces of EPDM liner together during installation or repair an existing pond liner: with OaseFol Primer, you ensure that the liner surface is correctly prepared for further processing.