Water

W’eau SMG-900 polyester side mount sand filter 32m³ is a very powerful sand filter for large above-ground and in-ground swimming pools. With a maximum flow rate of 32 m³ per hour and fine filtration of 25-30 microns, this filter delivers strong performance for pool installations where high capacity, reliability, and water quality are paramount. This model is suitable for swimming pools with a volume of up to 128 m³.

The side mount filter design ensures an efficient distribution of water across the entire sand bed. Because the 6-way valve is located on the side of the filter tank, the filter media is utilized more effectively and filtration is more efficient than with many standard top mount filters. In addition, the transparent filter cover makes inspection and maintenance easier, as you can quickly see the current condition inside the filter tank.

The filter tank is made of strong laminated polyester, making it highly resistant to heavy loads and intensive pool use. Thanks to its large capacity, sturdy construction, and 63 mm connection, the W’eau SMG-900 is a powerful choice for larger pool installations. The filter tank has a height of 110 cm, a diameter of 90 cm, and a filter media capacity of up to 400 kg.

Key features

• Polyester side mount sand filter for large swimming pools
• Maximum flow rate of 32 m³/h
• Suitable for swimming pools up to 128 m³
• Fine filtration of 25-30 microns
• Strong filter tank made of laminated polyester
• Suitable for heavy loads and intensive use
• Side mount design for better water distribution across the sand bed
• Efficient and effective filtration of pool water
• Equipped with a practical 6-way valve
• Transparent filter cover for easy inspection
• 63 mm connection
• Filter media capacity up to 400 kg
• Filter tank height: 110 cm
• Filter tank diameter: 90 cm
• Powerful choice for large above-ground and in-ground swimming pools

W’eau SMG-750 polyester side mount sand filter 22m³ is a very powerful sand filter for large above-ground and in-ground swimming pools. With a maximum flow rate of 22 m³ per hour and fine filtration of 25-30 microns, this filter delivers strong performance for pool installations where capacity, reliability, and water quality are paramount. This model is suitable for swimming pools with a volume of up to 88 m³.

The side mount filter design ensures an efficient distribution of water across the entire sand bed. Because the 6-way valve is located on the side of the filter tank, the filter media is better utilized and filtration is more effective than with many standard top mount filters. In addition, the transparent filter cover makes inspection and maintenance easier, as you can quickly see the current condition inside the filter tank.

The filter tank is made of strong laminated polyester, making it highly resistant to heavy loads and intensive pool use. Thanks to its large capacity, sturdy construction, and 63 mm connection, the W’eau SMG-750 is a powerful choice for larger pool installations. The filter tank has a height of 98 cm, a diameter of 75 cm, and a filter media capacity of up to 230 kg.

Key features

• Polyester side mount sand filter for large swimming pools
• Maximum flow rate of 22 m³/h
• Suitable for swimming pools up to 88 m³
• Fine filtration of 25-30 microns
• Strong filter tank made of laminated polyester
• Suitable for heavy loads and intensive use
• Side mount design for better water distribution across the sand bed
• Efficient and effective filtration of pool water
• Equipped with a practical 6-way valve
• Transparent filter cover for easy inspection
• Connection of 63 mm
• Filter media capacity up to 230 kg
• Filter tank height: 98 cm
• Filter tank diameter: 75 cm
• Powerful choice for large above-ground and in-ground swimming pools

W’eau SMG-650 polyester side mount sand filter 16m³ is a powerful polyester sand filter for clean, fresh and clear pool water. This model features a smooth gelcoat fiberglass finish, making the filter tank durable, reliable and suitable for long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. The side mount filter design ensures that the water is better distributed over the entire sand bed. This makes the filtration more efficient and effective than many standard top mount models. In addition, maintenance is easier thanks to the air vent and the transparent filter cover, allowing you to quickly check the filter without opening it completely.

The W’eau SMG-650 comes standard with connections for a 50 mm glue connection and a 38 mm threaded connection. The practical 6-way valve offers all the important functions for pool maintenance, such as filtering, backwashing, rinsing, closing, draining and circulating.

Key features

• Polyester side mount sand filter
• Filter capacity of 16 m³/h
• Fine filtration of 25-30 microns
• Smooth gelcoat fiberglass finish
• Durable and reliable choice for pool filtration
• Side mount design for better water distribution over the sand bed
• Efficient and effective filtration of pool water
• Practical 6-way valve
• Functions: filter, backwash, rinse, close, waste and circulate
• Transparent filter cover for easy inspection
• Air vent for extra convenience during maintenance
• Connection for 50 mm glue connection
• Connection for 38 mm threaded connection
• Suitable for clean, fresh and clear pool water
• Strong choice for powerful and easy-to-maintain pool filtration

W’eau SMG-500 polyester side mount sand filter 10m³ is a high-quality sand filter for clean, fresh and clear pool water. This model is known as a strong choice within its class and features a smooth gelcoat fiberglass finish. This makes the filter tank durable, reliable and suitable for long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. The side mount filter design ensures that the water is better distributed over the entire sand bed. This makes the filtration more efficient and effective than many standard top mount models. In addition, maintenance is easier thanks to the air vent and the transparent filter cover, allowing you to quickly check the filter without opening it completely.

The W’eau SMG-500 comes standard with connections for a 50 mm glue connection and a 38 mm threaded connection. The practical 6-way valve offers all the important functions for pool maintenance, such as filtering, backwashing, rinsing, closing, draining and circulating.

Key features

• Polyester side mount sand filter
• Filter capacity of 10 m³/h
• Fine filtration of 25-30 microns
• Features a smooth gelcoat fiberglass finish
• Durable and reliable choice for pool filtration
• Side mount design for better water distribution over the sand bed
• Efficient and effective filtration of pool water
• Features a practical 6-way valve
• Functions: filter, backwash, rinse, close, waste and circulate
• Transparent filter cover for easy inspection
• Air vent for extra convenience during maintenance
• Connection for 50 mm glue connection
• Connection for 38 mm threaded connection
• Suitable for clean, fresh and clear pool water
• Strong choice for reliable and easy-to-maintain pool filtration

W’eau MFV-24 variable sand filter set 16 m³/h is a powerful and energy-efficient filtration solution for larger swimming pools. This set combines a sand filter with a variable pool pump, allowing you to easily adjust the pump speed to the needs of your pool system. The pump only runs at higher capacity when necessary, saving energy while maintaining clean, clear pool water.

This variable sand filter set has a capacity of 16 m³ per hour and is suitable for pools up to 64,000 liters. Thanks to its fully self-priming operation and sturdy construction, the set is suitable for heavier applications. The 6-way valve offers all the important functions for pool maintenance, including filtering, backwashing, rinsing, draining, and circulating.

The W’eau MFV-24 is supplied Plug & Play, including a plug and coupling. This makes the set easy to connect and quickly ready for use. The connection is 50 mm; use additional adapters if necessary to make the set compatible with existing piping. For the best results, place the sand filter set above the water line.

Key features

• Variable sand filter set for energy-efficient pool maintenance
• Capacity of 16 m³/h
• Suitable for pools up to 64,000 liters
• Combines sand filter set with variable pool pump
• Pump speed easily adjustable
• Saves energy by only operating at maximum capacity when necessary
• Fully self-priming operation
• Suitable for heavier applications
• Equipped with a practical 6-way valve
• Functions for filter, backwash, rinse, waste, close, and circulate
• Supplied Plug & Play with plug and coupling
• Connection: 50 mm
• Use adapters if necessary for compatible piping
• Filter media capacity up to 85 kg
• Placement above the water line recommended for optimal results

W’eau MFV-20 variable sand filter set 12 m³/h is a powerful and energy-efficient filtration solution for pool water. This set combines a sand filter with a variable pool pump, allowing you to easily adjust the pump speed to the needs of your pool system. The pump only runs at higher capacity when necessary, saving energy while maintaining clean, clear pool water.

This variable sand filter set has a capacity of 12 m³ per hour and is suitable for pools up to 48,000 liters. Thanks to its fully self-priming operation and sturdy construction, the set is suitable for heavier applications. The 6-way valve offers all the important functions for pool maintenance, including filtering, backwashing, rinsing, draining, and circulating.

The W’eau MFV-20 is supplied Plug & Play, including a plug and coupling. This makes the set easy to connect and quickly ready for use. The connection is 50 mm; use additional adapters if necessary to adapt the set to existing piping. For the best results, place the sand filter set above the water line.

Key features

• Variable sand filter set for energy-efficient pool maintenance
• Capacity of 12 m³/h
• Suitable for pools up to 48,000 liters
• Combines sand filter set with variable pool pump
• Pump speed easily adjustable
• Saves energy by only operating at maximum capacity when necessary
• Fully self-priming operation
• Suitable for heavier applications
• Equipped with a practical 6-way valve
• Functions for filter, backwash, rinse, waste, close, and circulate
• Supplied Plug & Play with plug and coupling
• Connection: 50 mm
• Use adapters if necessary for suitable piping
• Filter media capacity up to a maximum of 85 kg
• Placement above the water line recommended for optimal results

W’eau MFV-17 variable sand filter set 8 m³/h is an innovative filtration solution for pool water and combines a sand filter set with a variable pool pump. This allows you to easily adjust the pump speed to the needs of your pool system. The pump only runs at higher capacity when necessary, saving energy without compromising on clean and clear pool water.

This variable sand filter set has a capacity of 8 m³ per hour and is suitable for pools up to 36,000 liters. Thanks to its fully self-priming operation and sturdy construction, the set is suitable for heavier applications. The 6-way valve offers all the functions needed for daily pool maintenance, such as filtering, backwashing, rinsing, draining, and circulating.

The W’eau MFV-17 is delivered Plug & Play, including a plug and coupling. This makes the set easy to connect and quickly ready for use. The connection is 50 mm; use additional adapters if necessary to make the set compatible with existing piping. For the best results, place the sand filter set above the water line.

Key features

• Variable sand filter set for energy-efficient pool maintenance
• Capacity of 8 m³/h
• Suitable for pools up to 36,000 liters
• Combines sand filter set with variable pool pump
• Pump speed easily adjustable
• Saves energy by only performing at maximum capacity when necessary
• Fully self-priming operation
• Suitable for heavier applications
• Equipped with a practical 6-way valve
• Functions for filter, backwash, rinse, waste, close, and circulate
• Plug & Play delivered with plug and coupling
• Connection: 50 mm
• Use adapters if necessary for compatible piping
• Filter media capacity up to a maximum of 45 kg
• Placement above the water line recommended for optimal results

W’eau V-700 fiberglass-reinforced topmount sand filter 20m³ is a powerful and durable filter solution for clean, fresh and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it stronger and more robust than standard filter tanks made only of polyethylene. This makes the filter highly resistant to high pressure, weather conditions and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This keeps the water clear and allows you to enjoy a refreshing swim in your own pool without worry. The topmount sand filter design allows for compact installation, as the 6-way valve is mounted on top of the filter tank.

The W’eau V-700 is equipped with a convenient 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, drain or circulate the water without filtration. This filter therefore combines powerful water purification with easy operation and practical maintenance.

Key features

• Fiberglass-reinforced topmount sand filter
• Filter capacity of 20 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• Stronger than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Topmount design for space-saving installation
• Equipped with a practical 6-way valve
• Easy to set the desired filter setting
• Functions: filter, backwash, rinse, close, waste and circulate
• Suitable for clean, fresh and clear pool water
• Practical for regular pool maintenance
• Compact solution for pool installations
• Easy to use and maintain
• Durable choice for reliable pool filtration

W’eau V-650 fiberglass-reinforced topmount sand filter 16m³ is a powerful and durable filter solution for clean, fresh and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it stronger and more robust than standard filter tanks made only of polyethylene. This makes the filter highly resistant to high pressure, weather conditions and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This keeps the water clear and allows you to enjoy a refreshing swim in your own pool without worry. The topmount sand filter design ensures compact installation, as the 6-way valve is mounted on top of the filter tank.

The W’eau V-650 is equipped with a convenient 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, waste or circulate the water without filtration. This filter therefore combines powerful water purification with easy operation and practical maintenance.

Key features

• Fiberglass-reinforced topmount sand filter
• Filter capacity of 16 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• Stronger than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Topmount design for space-saving installation
• Equipped with a practical 6-way valve
• Easy to set the desired filter setting
• Functions: filter, backwash, rinse, close, waste and circulate
• Suitable for clean, fresh and clear pool water
• Practical for regular pool maintenance
• Compact solution for pool installations
• Easy to use and maintain
• Durable choice for reliable pool filtration

W’eau V-500 fiberglass-reinforced top-mount sand filter 12m³ is a powerful and durable filter solution for clean, fresh and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it stronger and more robust than standard filter tanks made only of polyethylene. This makes the filter highly resistant to high pressure, weather conditions and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This keeps the water clear and allows you to enjoy a refreshing swim in your own pool without worry. The top-mount sand filter design ensures a compact installation, as the 6-way valve is mounted on top of the filter tank.

The W’eau V-500 is equipped with a convenient 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, waste, or circulate the water without filtration. This filter therefore combines powerful water purification with easy operation and practical maintenance.

Key features

• Fiberglass-reinforced top-mount sand filter
• Filter capacity of 12 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• Stronger than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Top-mount design for space-saving installation
• Equipped with a practical 6-way valve
• Easy to set the desired filter setting
• Functions: filter, backwash, rinse, close, waste and circulate
• Suitable for clean, fresh and clear pool water
• Practical for regular pool maintenance
• Compact solution for pool installations
• Easy to use and maintain
• Durable choice for reliable pool filtration

W’eau V-450 fiberglass-reinforced topmount sand filter 8m³ is a strong and reliable sand filter for clean, fresh and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it sturdier and more durable than standard filter tanks made only of polyethylene. This makes the filter highly resistant to high pressure, weather conditions and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This keeps the water clear and allows you to enjoy a refreshing swim in your own pool without worry. The topmount sand filter design allows for compact installation, as the 6-way valve is mounted on top of the filter tank.

The W’eau V-450 is equipped with a convenient 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, drain or circulate the water without filtration. This filter therefore combines effective water purification with easy operation and practical maintenance.

Key features

• Fiberglass-reinforced topmount sand filter
• Filter capacity of 8 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• Stronger than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Topmount design for space-saving installation
• Equipped with a practical 6-way valve
• Easy to set the desired filter setting
• Functions: filter, backwash, rinse, close, waste and circulate
• Suitable for clean, fresh and clear pool water
• Practical for regular pool maintenance
• Compact solution for pool installations
• Easy to use and maintain
• Durable choice for reliable pool filtration

W’eau V-400 fiberglass-reinforced topmount sand filter 6m³ is a strong and reliable sand filter for clean, fresh and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it sturdier and more durable than standard filter tanks made only of polyethylene. This makes the filter highly resistant to high pressure, weather conditions and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This keeps the water clear and allows you to enjoy a refreshing swim in your own pool without worry. The topmount sand filter design ensures compact installation, as the 6-way valve is mounted on top of the filter tank.

The W’eau V-400 is equipped with a convenient 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, waste or circulate the water without filtration. This filter therefore combines effective water purification with easy operation and practical maintenance.

Key features

• Fiberglass-reinforced topmount sand filter
• Filter capacity of 6 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• Stronger than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Topmount design for space-saving installation
• Equipped with a practical 6-way valve
• Easy to set the desired filter setting
• Functions: filter, backwash, rinse, close, waste and circulate
• Suitable for clean, fresh and clear pool water
• Practical for regular pool maintenance
• Compact solution for pool installations
• Easy to use and maintain
• Durable choice for reliable pool filtration

W’eau V-350 fiberglass-reinforced top-mount sand filter 4 m³ is a compact and sturdy sand filter for clean, fresh, and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it stronger and more durable than standard filter tanks made solely of polyethylene. This makes the filter highly resistant to high pressure, weather conditions, and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This helps keep the water better balanced, allowing you to enjoy a refreshing swim in your own pool with peace of mind. The top-mount sand filter design also allows for compact installation, as the 6-way valve is mounted on top of the filter tank.

The W’eau V-350 features a convenient 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, waste, or circulate the water without filtration. This filter therefore combines effective water purification with easy operation and practical maintenance.

Key features

• Fiberglass-reinforced top-mount sand filter
• Filtration capacity of 4 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• Stronger than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Top-mount design for space-saving installation
• Equipped with a practical 6-way valve
• Easy to set the desired filter setting
• Functions: filter, backwash, rinse, close, waste, and circulate
• Suitable for clean, fresh, and clear pool water
• Practical for regular pool maintenance
• Compact solution for smaller pool installations
• Easy to use and maintain
• Durable choice for reliable pool filtration

W’eau HDPE-500 top mount sand filter 12m³ is a strong and space-saving sand filter for above-ground and in-ground pools up to 48,000 liters. The filter tank is made of high-quality polyethylene, making it highly resistant to weather conditions, pressure, and heavy pool use. Thanks to the fine filtration of 25-30 microns, this sand filter helps keep pool water clean, fresh, and clear.

This model is designed as a top mount filter, with the 6-way valve mounted on top of the filter tank. This means the filter takes up less space than a side mount version and the direction of the water can be easily adjusted. This makes the HDPE-500 particularly practical for compact equipment rooms or tidy pool installations.

The W’eau HDPE-500 is equipped with a convenient 6-way valve with all the important functions for pool maintenance. With this, you can filter, backwash, rinse, close, drain water, or circulate the water without filtration. This sand filter thus combines reliable filtration with a compact, user-friendly, and easy-to-maintain design.

Key points

• Top mount sand filter for above-ground and in-ground pools
• Suitable for pools up to 48,000 liters
• Filter capacity of 12 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of high-quality polyethylene
• Resistant to weather conditions, pressure, and heavy loads
• Top mount 6-way valve saves space
• Easy adjustment of the desired water flow
• Equipped with a practical 6-way valve
• Functions: filter, backwash, rinse, close, waste, and circulate
• Compact solution for pool installations
• Suitable for daily pool maintenance
• Helps keep pool water clean, fresh, and clear
• Practical for equipment rooms with limited space
• Reliable choice for efficient pool filtration

W’eau HDPE-450 top mount sand filter 8m³ is a strong and space-saving sand filter for above-ground and in-ground pools up to 32,000 liters. The filter tank is made of high-quality polyethylene, making it highly resistant to weather conditions, pressure, and heavy pool use. Thanks to the fine filtration of 25-30 microns, this sand filter helps keep pool water clean, fresh, and clear.

This model is designed as a top mount filter, with the 6-way valve mounted on top of the filter tank. This means the filter takes up less space than a side mount version and the direction of the water can be easily adjusted. This makes the HDPE-450 particularly practical for compact equipment rooms or tidy pool installations.

The W’eau HDPE-450 is equipped with a convenient 6-way valve with all the important functions for pool maintenance. With this, you can filter, backwash, rinse, close, drain the water, or circulate the water without filtration. This sand filter thus combines reliable filtration with a compact, user-friendly, and easy-to-maintain design.

Key points

• Top mount sand filter for above-ground and in-ground pools
• Suitable for pools up to 32,000 liters
• Filter capacity of 8 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of high-quality polyethylene
• Resistant to weather conditions, pressure, and heavy loads
• Top mount 6-way valve saves space
• Easy to set the desired water flow
• Equipped with a practical 6-way valve
• Functions: filter, backwash, rinse, close, waste, and circulate
• Compact solution for pool installations
• Suitable for daily pool maintenance
• Helps keep pool water clean, fresh, and clear
• Practical for equipment rooms with limited space
• Reliable choice for efficient pool filtration

W’eau HDPE-400 top mount sand filter 6.5m³ is a strong and space-saving sand filter for above-ground and in-ground pools up to 24,000 liters. The filter tank is made of high-quality polyethylene, making it highly resistant to weather conditions, pressure, and heavy pool use. Thanks to the fine filtration of 25-30 microns, this sand filter helps keep pool water clean, fresh, and clear.

This model is designed as a top mount filter, with the 6-way valve mounted on top of the filter tank. This means the filter takes up less space than a side mount version and the direction of the water can be easily adjusted. This makes the HDPE-400 particularly practical for compact equipment rooms or tidy pool installations.

The W’eau HDPE-400 is equipped with a convenient 6-way valve with all the important functions for pool maintenance. With this, you can filter, backwash, rinse, close, drain the water, or circulate the water without filtration. This sand filter thus combines reliable filtration with a compact, user-friendly, and easy-to-maintain design.

Key points

• Top mount sand filter for above-ground and in-ground pools
• Suitable for pools up to 24,000 liters
• Filter capacity of 6.5 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of high-quality polyethylene
• Resistant to weather conditions, pressure, and heavier loads
• Top mount 6-way valve saves space
• Easy to set the desired water flow
• Equipped with a practical 6-way valve
• Functions: filter, backwash, rinse, close, waste, and circulate
• Compact solution for pool installations
• Suitable for daily pool maintenance
• Helps keep pool water clean, fresh, and clear
• Practical for equipment rooms with limited space
• Reliable choice for efficient pool filtration

W’eau HDPE-350 top mount sand filter 4.5m³ is a compact and robust sand filter for above-ground and in-ground pools up to 16,000 liters. The filter tank is made of high-quality polyethylene, making it highly resistant to weather conditions, pressure, and heavy use. Thanks to its fine filtration of 25-30 microns, this sand filter helps keep pool water clean, fresh, and clear.

This model features a top mount filter design, with the 6-way valve mounted on top of the filter tank. This allows the filter to take up less space and makes it easy to adjust the water flow. The top mount design is therefore particularly practical when the equipment room is compact or when you want to maintain an organized installation.

The W’eau HDPE-350 is equipped with a convenient 6-way valve with all the important functions for pool maintenance. This allows you to filter, backwash, rinse, close, waste, or circulate the water without filtration. This makes this sand filter a practical choice for those who want to combine reliable pool maintenance with a compact design.

Key features

• Top mount sand filter for above-ground and in-ground pools
• Suitable for pools up to 16,000 liters
• Filtration capacity of 4.5 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of high-quality polyethylene
• Resistant to weather conditions, pressure, and heavy use
• Top mount 6-way valve saves space
• Easy to adjust the desired water flow
• Equipped with a practical 6-way valve
• Functions: filter, backwash, rinse, close, waste, and circulate
• Compact solution for smaller pool installations
• Suitable for daily pool maintenance
• Helps keep pool water clean, fresh, and clear
• Practical for equipment rooms with limited space
• Reliable choice for efficient pool filtration

W’eau S-700 fiberglass-reinforced sidemount sand filter 20m³ is a powerful filter solution for clean, fresh and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it more durable than standard filter tanks made only of polyethylene. This makes the sand filter highly resistant to high pressure, weather conditions and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This helps keep the water clear and makes the pool more pleasant to use. The sidemount filter design ensures an efficient distribution of water over the entire sand bed. Because the 6-way valve is located on the side of the filter tank, the filter media is better utilized and maintenance is easier to perform.

The W’eau S-700 is equipped with a practical 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, drain or circulate the water without filtration. Thanks to the air vent and the transparent filter cover, you can easily check the filter without opening it completely.

Key features

• Fiberglass-reinforced sidemount sand filter
• Filter capacity of 20 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• More durable than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Side mount design for more efficient water distribution
• Better utilization of the entire sand bed
• Equipped with a practical 6-way valve
• Functions: filter, backwash, rinse, close, waste and circulate
• Transparent filter cover for easy inspection
• Air vent for extra convenience during maintenance
• Suitable for clean, fresh and clear pool water
• Practical for regular pool maintenance
• Strong choice for powerful and durable pool filtration

W’eau S-650 fiberglass-reinforced sidemount sand filter 16m³ is a powerful filter solution for clean, fresh and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it sturdier than standard filter tanks made only of polyethylene. This makes the sand filter highly resistant to high pressure, weather conditions and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This helps keep the water clear and makes the pool more pleasant to use. The sidemount filter design ensures an efficient distribution of water over the entire sand bed. Because the 6-way valve is located on the side of the filter tank, the filter media is better utilized and maintenance is easier to perform.

The W’eau S-650 is equipped with a practical 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, drain or circulate the water without filtration. Thanks to the air vent and the transparent filter cover, you can easily check the filter without opening it completely.

Key features

• Fiberglass-reinforced sidemount sand filter
• Filter capacity of 16 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• Sturdier than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Side mount design for more efficient water distribution
• Better utilization of the entire sand bed
• Equipped with a practical 6-way valve
• Functions: filter, backwash, rinse, close, waste and circulate
• Transparent filter cover for easy inspection
• Air vent for extra convenience during maintenance
• Suitable for clean, fresh and clear pool water
• Practical for regular pool maintenance
• Strong choice for durable and powerful pool filtration

W’eau S-500 fiberglass-reinforced sidemount sand filter 12m³ is a powerful filter solution for clean, fresh and clear pool water. The filter tank is made of polyethylene and reinforced with polyester, making it more durable than standard filter tanks made only of polyethylene. This makes the sand filter highly resistant to high pressure, weather conditions and long-term pool use.

Thanks to the fine filtration of 25-30 microns, dirt particles are effectively filtered out of the pool water. This helps keep the water clear and makes the pool more pleasant to use. The sidemount filter design ensures an efficient distribution of water over the entire sand bed. Because the 6-way valve is located on the side of the filter tank, the filter media is better utilized and maintenance is easier to perform.

The W’eau S-500 is equipped with a practical 6-way valve with all the important settings for pool maintenance. This allows you to filter, backwash, rinse, close, drain or circulate the water without filtration. Thanks to the air vent and the transparent filter cover, you can easily check the filter without opening it completely.

Key features

• Fiberglass-reinforced sidemount sand filter
• Filter capacity of 12 m³/h
• Fine filtration of 25-30 microns
• Filter tank made of polyethylene, reinforced with polyester
• More durable than standard polyethylene filter tanks
• Resistant to high pressure and weather conditions
• Side mount design for more efficient water distribution
• Better utilization of the entire sand bed
• Equipped with a practical 6-way valve
• Functions: filter, backwash, rinse, close, waste and circulate
• Transparent filter cover for easy inspection
• Air vent for extra convenience during maintenance
• Suitable for clean, fresh and clear pool water
• Practical for regular pool maintenance
• Strong choice for durable pool filtration