Swimming Pool Accessories

Polytropic Complete extension kit with enclosure and transparent display protective cover, for TFT display, cable length 10 m. Suitable for all pool heat pump models, except Morpheo, Verso and Urban

Polytropic Luxury bypass installation kit for swimming pool heat pumps - HRS

The W'eau anti-vibration mounts for mini heat pumps are designed to reduce vibrations and resonance from a compact pool heat pump. The set consists of four separate mounting feet made of anti-vibration rubber with an integrated aluminium profile. By placing the heat pump on these mounts, it does not stand directly on the ground, and vibrations are better absorbed.

This is particularly practical when a mini heat pump is placed on a hard surface such as concrete, tiles, or paving. Vibrations from the compressor and fan can be transmitted through such a surface. The rubber mounts limit this transmission and thus contribute to a quieter installation.

For mini heat pumps up to 40 cm deep

The set is intended for compact pool heat pumps with a maximum depth of 40 cm. This makes the anti-vibration mounts suitable for, among others, various W'eau Mini Power and Mini Inverter Plus heat pumps.

Always check the dimensions and mounting points of the heat pump before installation. For larger Full Inverter heat pumps, longer mounting bars of, for example, 45 or 60 cm are a more suitable solution.

Rubber with integrated aluminium profile

Each anti-vibration mount consists of black rubber with an integrated aluminium profile. The rubber provides the damping effect between the heat pump and the ground.

The aluminium profile forms the mounting point for the heat pump. This allows the unit to be securely mounted on the mounts without standing directly on the ground.

Reduces vibrations and resonance

A pool heat pump contains moving parts, including a compressor and fan. This causes slight vibrations during use. When the heat pump stands directly on a hard surface, these vibrations can be transmitted to, for example, paving, a concrete floor, or a patio.

By mounting the heat pump on rubber anti-vibration mounts, this direct connection is broken. This transfers less vibration to the ground and can reduce resonance.

Complete set for one mini heat pump

You receive four anti-vibration mounts, sufficient to support one suitable mini heat pump at four points. The required mounting hardware with bolts and nuts is included.

The feet have dimensions of approximately 230 × 140 × 160 mm each. Due to their compact size, they are designed for smaller pool heat pumps.

Installation

Place the four mounts on a flat, stable, and sufficiently load-bearing surface. Then position the heat pump on the mounts and align the mounting points with the aluminium profiles.

Using the included mounting hardware, the heat pump can then be attached to the mounts. Ensure that the heat pump is stable and level after installation, and leave sufficient free space around the unit according to the heat pump's installation instructions.

Important points

• Set of 4 anti-vibration mounts
• Specially for compact pool heat pumps
• Suitable for mini heat pumps up to a maximum of 40 cm deep
• Suitable for, among others, various W'eau Mini Power models
• Suitable for, among others, various W'eau Mini Inverter Plus models
• Reduces the transmission of vibrations to the ground
• Helps limit resonance and contact noise
• Made of anti-vibration rubber
• Equipped with an integrated aluminium profile
• Colour: black
• Includes bolts and nuts for installation
• Dimensions per mount: approximately 230 × 140 × 160 mm
• Four pieces for the installation of one suitable mini heat pump

PoolLine Heat Cleaner 1L is a special cleaning product for maintaining swimming pool heat pumps. During use, dirt, dust, leaves and deposits can accumulate on the evaporator, condenser and the grille behind the heat pump. When these parts become dirty, the airflow can decrease and the heat pump has to work harder to achieve the same efficiency.

By regularly cleaning the heat pump with Heat Cleaner, the air circulation remains better maintained and the installation can continue to function more efficiently. A clean grille ensures that the heat pump can draw in sufficient air, making it easier to achieve the desired performance. Regular maintenance also contributes to a longer lifespan of the heat pump and a more reliable heating process.

Key points

• Special cleaner for swimming pool heat pumps
• Suitable for cleaning the evaporator, condenser and grille
• Helps remove dirt, deposits and accumulated dust
• Supports better airflow to the heat pump
• Contributes to optimal performance and efficiency
• Helps extend the lifespan of the heat pump
• Easy to apply with sprayer
• Leave the product to work for approximately 10 minutes
• Then rinse off with a garden hose
• Contents: 1 liter including sprayer

The Polytropic central control panel is designed for maximum control over RAK-Inverter heat pumps in larger installations. This system acts as the central brain of your installation, allowing you to control multiple heat pumps efficiently and clearly.

Thanks to the clear interface, you can easily manage:

• temperature settings
• operating modes (heating, cooling, auto)
• performance settings per unit

Centralized control optimizes the interaction between multiple heat pumps, resulting in more efficient energy consumption and more stable performance.

The panel is designed for installation in the technical room, allowing your installation to be neatly and professionally set up without relying on individual unit control.

This makes the system indispensable in installations where scalability, control, and efficiency are paramount.

Key benefits

• Central control of up to 16 heat pumps
• Clear and user-friendly interface
• Efficient control of complete installations
• Ideal for commercial and larger projects
• Installation in the technical room
• Increases efficiency and control

Specifications

• Compatibility: Polytropic RAK-Inverter series
• Max. number of units: 16
• Operation: central display
• Application: swimming pool installations
• Installation: technical room

W’eau Solar Panel – Sustainable Pool Heating for Pools up to 10,000 Liters

Enjoy warm pool water for longer with the W’eau solar panel! This eco-friendly solar panel uses solar energy to heat your pool in a natural and cost-effective way. Thanks to its compact size (72 x 46 x 11 cm), the panel is ideal for above-ground pools with a capacity of up to 10 m³ (10,000 liters).

How does it work?

The pool water is circulated through the solar collector via hoses, where it is heated by the sun. The heated water then flows back into the pool, allowing the temperature to rise naturally – without additional energy costs.

Easy installation and expansion

The W’eau solar panel features adjustable legs, allowing you to easily tilt and aim the panel toward the sun. This ensures that sunlight is optimally utilized throughout the day. The panel can be quickly connected to the existing pool pump and comes with standard 32/38 mm connections. Want to heat faster and more efficiently? You can connect up to two panels together for greater heating capacity.

Important tips for use

• Pump capacity: Make sure your pool pump is powerful enough to circulate the water through the panel. A flow rate of up to 10,000 liters per hour is possible, but this requires a pump with sufficient capacity.

• Be careful with overcapacity: A pump that is too powerful can damage the pipes and the panel, while a pump that is too weak will not provide enough pressure for effective heating. Consult your pump's manual or seek advice to find the right combination.

• Optimal placement: Place the panel in a sunny spot, preferably facing south, with as little shade as possible during the day.

• Use in combination with a cover: For the best heating results, use the solar panel together with a solar pool cover so that heat is lost more slowly.

Benefits at a glance

✔ Sustainable and energy-efficient
✔ Easy to install and use
✔ Suitable for pools up to 10,000 liters
✔ Can be connected to a second panel
✔ Adjustable legs for optimal sun orientation

Solar Bol – up to 10 m³ – W’eau

The W'eau Solar Bol is an energy-efficient and environmentally friendly solution for improving water quality in small to medium-sized ponds. This decorative, solar-powered sphere provides circulation and extra oxygen in the pond water – essential for healthy plants and fish.

Key features:

• Solar-powered:
  No cables or power supply required. The integrated solar panel automatically powers the pump when there is sufficient sunlight.

• Suitable for ponds up to 10 m³:
  Ideal for small and medium-sized garden ponds and water features.

• Improves oxygen levels and water circulation:
  Helps limit algae growth and promotes a healthy biological balance.

• Quiet and low-maintenance:
  The pump operates silently and requires little maintenance, with an easy-to-clean filter.

• Decorative and functional:
  The spherical design combines a modern look with practical functionality.

• Easy installation:
  Place the sphere in the water and point the solar panel towards the sun – ready to use.

Technical specifications:

• Maximum pond size: 10,000 litres (10 m³)

• Power supply: Solar panel (included)

• Pump capacity: Depending on sunlight intensity

• Material: UV-resistant plastic

• Dimensions: approx. Ø 30 cm

Polytropic HRS heat pump protective cover, medium size 810 mm x 280 mm x 530 mm, suitable for Polytropic heat pumps up to 10 kW

Polytropic HRS heat pump protective cover, large size 920 mm x 340 mm x 690 mm, suitable for Polytropic heat pumps from 10 kW

Polytropic Complete extension kit with enclosure and transparent display protective cover, for LCD display, cable length 10 m. Suitable for Morpheo and Verso swimming pool heat pump models

These vibration dampers are designed to reduce vibrations from heat pumps and minimize noise levels. Here are some key features and considerations regarding these vibration dampers:

1. **Vibration-damping rubber:** The mounting beams are made of vibration-damping rubber. This material absorbs vibrations generated by the operation of the heat pump. This contributes to quieter operation and minimizes noise vibrations.

2. **Cast-in aluminum profile:** The beams contain an integrated aluminum profile for extra strength and durability. This aluminum profile reinforces the beams and ensures the stability of the installed heat pump.

3. **Easy installation:** The set is supplied with matching mounting screws and nuts, making the installation of the vibration dampers relatively easy. You can mount these beams under your heat pump to effectively reduce vibrations.

4. **Suitable for heat pumps up to 40 cm deep:** These vibration dampers are designed for heat pumps with a maximum depth of 40 cm. Check whether your heat pump fits within these specifications before purchasing these dampers.

5. **Quietness and vibration reduction:** By using these vibration dampers, you can minimize vibrations, resulting in quieter operation of the heat pump. This creates a more comfortable and peaceful environment around the heat pump.

This set of vibration dampers is supplied as a complete set of 2 beams. It is a convenient addition to reduce noise levels and vibrations from your heat pump, allowing you to create a quieter and more pleasant working environment. Make sure your heat pump is compatible with these dampers before purchasing them.